E. Rauch, Plastic anisotropy of sheet metals determined by simple shear tests, Materials Science and Engineering: A, vol.241, issue.1-2, 1998.
DOI : 10.1016/S0921-5093(97)00486-3

S. Bouvier, H. Haddadi, P. Levee, and C. Teodosiu, Simple shear tests, Mater Sci Eng A, vol.241, pp.179-183, 2006.

S. Bouvier, B. Gardey, H. Haddadi, C. Teodosiu, E. Rauch et al., Characterization of the straininduced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests Flow localization induced by a change in strain path in mild steel Dislocation substructures in mild steel deformed in simple shear New accurate procedure for single shear testing of metals, J Mater Proc Technol J Mater Proc Technol Mater Sci Eng A Mater Sci Eng A J Mater Compos Sci Technol, vol.1729, issue.28, pp.96-103115, 1967.

Y. Bao and T. Wierzbicki, On fracture locus in the equivalent strain and stress triaxiality space, International Journal of Mechanical Sciences, vol.46, issue.1, pp.81-98, 2004.
DOI : 10.1016/j.ijmecsci.2004.02.006

A. Burr, F. Hild, and F. Leckie, Continuum description of damage in ceramicmatrix composites, Eur J Mech A/Solids, vol.16, issue.1, pp.53-78, 1997.

H. Bruck, S. Mcneill, M. Sutton, and W. Peters, Digital image correlation using Newton-Raphson method of partial differential correction, Experimental Mechanics, vol.19, issue.12, pp.261-267, 1989.
DOI : 10.1007/BF02321405

M. Sutton, S. Mcneill, J. Helm, and Y. Chao, Advances in Two-Dimensional and Three-Dimensional Computer Vision, pp.323-372, 2000.
DOI : 10.1007/3-540-48800-6_10

F. Hild, B. Raka, M. Baudequin, S. Roux, and F. Cantelauble, Multiscale displacement field measurements of compressed mineral-wool samples by digital image correlation, Applied Optics, vol.41, issue.32, pp.6815-6828, 2002.
DOI : 10.1364/AO.41.006815
URL : https://hal.archives-ouvertes.fr/hal-00002901

T. Chu, W. Ranson, M. Sutton, and W. Peters, Applications of digital-image-correlation techniques to experimental mechanics, Experimental Mechanics, vol.1, issue.3, pp.232-244, 1985.
DOI : 10.1007/BF02325092

G. Besnard, F. Hild, and S. Roux, ???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.789-803, 2006.
DOI : 10.1007/s11340-006-9824-8
URL : https://hal.archives-ouvertes.fr/hal-00124513/file/EM2-ccsd.pdf

C. Tay, C. Quan, Y. Huang, and Y. Fu, Digital image correlation for whole field out-of-plane displacement measurement using a single camera, Optics Communications, vol.251, issue.1-3, pp.23-36, 2005.
DOI : 10.1016/j.optcom.2005.02.070

A. Khan and S. Huang, Continuum theory of plasticity, 1995.

S. Bergonnier, F. Hild, and S. Roux, Digital image correlation used for mechanical tests on crimped glass wool samples, The Journal of Strain Analysis for Engineering Design, vol.32, issue.2, pp.185-197, 2005.
DOI : 10.1243/030932405X7773
URL : https://hal.archives-ouvertes.fr/hal-00013799

A. Reyes, O. Hopperstad, O. Lademo, and M. Langseth, Modeling of textured aluminum alloys used in a bumper system: Material tests and characterization, Computational Materials Science, vol.37, issue.3, pp.246-268, 2006.
DOI : 10.1016/j.commatsci.2005.07.001

T. Wang, O. Hopperstad, O. Lademo, P. Larsen, M. Cockcroft et al., Finite element analysis of welded beam-to-column joints in aluminium alloy EN AW 6082 T6 Ductility and the workability of metals, J Inst Met, vol.96, pp.33-39, 1968.

J. Hallquist, LS-Dyna Theoretical Manual, 1998.

T. Berstad, O. Lademo, and O. Hopperstad, Weak and strong texture models in LS-DYNA (WTM-2D/3D and STM-2D), 2005.

A. Hershey, Plasticity of isotropic aggregate of anisotropic facecentred cubic crystals, J Appl Mech, vol.21, issue.3, pp.241-249, 1954.

R. Logan and W. Hosford, Upper-bound anisotropic yield locus calculations assuming ???111???-pencil glide, International Journal of Mechanical Sciences, vol.22, issue.7, pp.419-430, 1980.
DOI : 10.1016/0020-7403(80)90011-9

M. Eriksson, O. Lademo, and O. Hopperstad, Development and use of in-plane shear tests to identify ductile failure parameters of aluminium alloys, Proceedings of 9 th international conference on material forming (ESAFORM-2006), pp.331-334, 2006.

M. Worswick, A. Pilkey, X. Lalbin, S. Truttmann, G. Liu et al., Prediction of ductile fracture under high strain rate conditions. Final report for SNC Industrial Technologies, Defence Research Establishment Valcartier (DREV), Defence Research Establishment Suffield (DRES), 2000.

S. Dey, T. Børvik, O. Hopperstad, and M. Langseth, On the influence of fracture criterion in projectile impact of steel plates, Computational Materials Science, vol.38, issue.1, pp.176-191, 2006.
DOI : 10.1016/j.commatsci.2006.02.003

C. Dørum, O. Hopperstad, O. Lademo, and M. Langseth, Numerical modelling of the structural behaviour of thin-walled cast magnesium components, International Journal of Solids and Structures, vol.42, issue.7, pp.2129-2144, 2005.
DOI : 10.1016/j.ijsolstr.2004.08.019

T. Kwak, Y. Kim, and W. Bae, Finite element analysis on the effect of die clearance on shear planes in fine blanking, Journal of Materials Processing Technology, vol.130, issue.131, pp.462-468, 2002.
DOI : 10.1016/S0924-0136(02)00767-7

D. Ko, B. Kim, and J. Choi, Prediction of surface-fracture initiation in the axisymmetric extrusion and simple upsetting of an aluminum alloy, Journal of Materials Processing Technology, vol.62, issue.1-3, pp.1-3, 1996.
DOI : 10.1016/0924-0136(95)02200-7