O. C. Zienkievicz and R. L. Taylor, The Finite Element Method, 1989.

H. G. Kwak and F. C. Filippou, Nonlinear FE analysis of structures under monotonic loads, Computers & Structures, vol.65, issue.1, pp.1-16, 1997.
DOI : 10.1016/S0045-7949(96)00299-4

N. Ile, J. M. Reynouard, and J. F. Georgin, Non-linear response and modelling of RC walls subjected to seismic loading, ISET J. Earthqu. Technol, vol.39, 2002.

J. Y. Rashid, R. A. Dameron, and R. S. Dunham, Finite element analysis of reinforced concrete in bridge seismic design practice, in: Modeling of inelastic behavior of RC structures under seismic loads, pp.217-233, 2001.

M. Kwon and E. Spacone, Three-dimensional finite element analyses of reinforced concrete columns, Computers & Structures, vol.80, issue.2, pp.199-212, 2002.
DOI : 10.1016/S0045-7949(01)00155-9

J. Mazars and G. Pijaudier-cabot, Continuum Damage Theory???Application to Concrete, Journal of Engineering Mechanics, vol.115, issue.2, pp.345-365, 1989.
DOI : 10.1061/(ASCE)0733-9399(1989)115:2(345)

F. Légeron, P. Paultre, and J. Mazars, Damage Mechanics Modeling of Nonlinear Seismic Behavior of Concrete Structures, Journal of Structural Engineering, vol.131, issue.6, pp.131-137, 2005.
DOI : 10.1061/(ASCE)0733-9445(2005)131:6(946)

N. Möes, J. Dolbow, and T. Belytschko, A finite element method for crack growth without remeshing, Int. J. Num. Meth. Eng, pp.46-47, 1999.

G. Wells and L. Sluys, A new method for modelling cohesive cracks using finite elements, International Journal for Numerical Methods in Engineering, vol.3, issue.12, pp.2667-2682, 2001.
DOI : 10.1002/nme.143

M. Jirasek, Comparative study on finite elements with embedded discontinuities, Computer Methods in Applied Mechanics and Engineering, vol.188, issue.1-3, pp.307-330, 2000.
DOI : 10.1016/S0045-7825(99)00154-1

J. J. Remmers, R. De-borst, and A. Needleman, A cohesive segments method for the simulation of crack growth, Computational Mechanics, vol.31, issue.1-2, pp.31-69, 2003.
DOI : 10.1007/s00466-002-0394-z

R. Graves, Simulating Seismic wave propagation in 3D elastic media using staggered grid finite differences, Bull. Seism. Soc. Am, vol.86, pp.1091-1106, 1996.

K. Olsen and R. Archuleta, Three-Dimensional simulation of earthquakes on the Los Angeles fault system, Bull. Seism. Soc. Am, vol.86, pp.575-586, 1996.

H. Kawase, Time-Domain response of a semi-circular canyon for incident SV, P, and Rayleigh waves calculated by the discrete wavenumber boundary element method, Bull. Seism. Soc. Am, pp.78-1415, 1988.

H. B. Coda and W. S. Venturini, Three-dimensional transient BEM analysis, Computers & Structures, vol.56, issue.5, pp.751-768, 1995.
DOI : 10.1016/0045-7949(95)00006-3

. Xu, Large-scale simulation of elastic wave propagation in heterogeneous media on parallel computers, Comp. Meth. Appl. Mech. Eng, vol.152, issue.856102, 1998.

H. B. Coda, W. S. Venturini, and F. Aliabadi, A General 3D BEM/FEM Coupling Applied to Elastodinamic Continua/Frame Structures Interaction Analysis, Int. J. Num. Meth. Eng, pp.46-695, 1999.
DOI : 10.1002/(sici)1097-0207(19991020)46:5<695::aid-nme692>3.0.co;2-m

M. A. Millan and J. Dominguez, Coupled BEM/FEM model for dynamic analysis of large structures founded on piles in viscoelastic or porous saturated soils, Proceedings 17th ASCE Engineering Mechanics Conference, p.8, 2004.

D. R. Owen and E. Hinton, Finite elements in plasticity: Theory and practice, 1980.

J. Guedes, P. Pégon, and A. Pinto, A fiber Timoshenko beal element in CASTEM, Special publication No. I, vol.2102094, p.31, 1994.

L. Davenne, F. Ragueneau, J. Mazars, and A. Ibrahimbegovic, Efficient approaches to finite element analysis in earthquake engineering, Computers & Structures, vol.81, issue.12, pp.81-93, 2003.
DOI : 10.1016/S0045-7949(03)00038-5

P. Kotronis and J. Mazars, SIMPLIFIED MODELLING STRATEGIES TO SIMULATE THE DYNAMIC BEHAVIOUR OF R/C WALLS, Journal of Earthquake Engineering, vol.35, issue.4, pp.285-306, 2005.
DOI : 10.1002/(SICI)1096-9845(199607)25:7<711::AID-EQE576>3.0.CO;2-9

URL : https://hal.archives-ouvertes.fr/hal-01007290

A. Cipollina, A. López-inojosa, and J. Flórez-lópez, A simplified damage mechanics approach to nonlinear analysis of frames, Computers & Structures, vol.54, issue.6, pp.54-60, 1995.
DOI : 10.1016/0045-7949(94)00394-I

M. E. Marante and J. Flórez-lópez, model of damage for RC elements subjected to biaxial bending, Engineering Structures, vol.24, issue.9, pp.1141-1152, 2002.
DOI : 10.1016/S0141-0296(02)00044-5

F. Armero and D. Ehrlich, Numerical modeling of softening hinges in thin Euler???Bernoulli beams, Computers & Structures, vol.84, issue.10-11, pp.641-656, 2006.
DOI : 10.1016/j.compstruc.2005.11.010

J. Lemaitre, A Course on Damage Mechanics, 1992.

I. S. Sohal and W. Chen, Local Buckling and Sectional Behavior of Fabricated Tubes, Journal of Structural Engineering, vol.113, issue.3, pp.113-116, 1987.
DOI : 10.1061/(ASCE)0733-9445(1987)113:3(519)

M. E. Marante and J. Flórez-lópez, Three-dimensional analysis of reinforced concrete frames based on lumped damage mechanics, International Journal of Solids and Structures, vol.40, issue.19, pp.40-5109, 2003.
DOI : 10.1016/S0020-7683(03)00258-0

T. C. Chu, W. F. Ranson, M. A. Sutton, and W. H. Petters, Applications of digital-image-correlation techniques to experimental mechanics, Experimental Mechanics, vol.1, issue.3, pp.3-25, 1985.
DOI : 10.1007/BF02325092

F. Hild and S. Roux, Digital Image Correlation: from Displacement Measurement to Identification of Elastic Properties - a Review, Strain, vol.334, issue.Srie I, pp.69-80, 2006.
DOI : 10.1111/j.1475-1305.2006.00258.x

URL : https://hal.archives-ouvertes.fr/hal-00013816

G. Besnard, F. Hild, and S. Roux, ???Finite-Element??? Displacement Fields Analysis from Digital Images: Application to Portevin???Le Ch??telier Bands, Experimental Mechanics, vol.404, issue.3, pp.46-789, 2006.
DOI : 10.1007/s11340-006-9824-8

P. Forquin, L. Rota, Y. Charles, and F. Hild, A Method to Determine the Toughness Scatter of, Brittle Materials, Int. J. Fract, pp.125-126, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00002912

M. Küntz, M. Jolin, J. Bastien, F. Perez, and F. Hild, Digital image correlation analysis of crack behavior in a reinforced concrete beam during a load test, Canad, J. Civil Eng, vol.33, pp.1418-1425, 2006.

J. Réthoré, S. Roux, and F. Hild, From pictures to extended finite elements: extended digital image correlation (X-DIC), Comptes Rendus M??canique, vol.335, issue.3, pp.136-137, 2007.
DOI : 10.1016/j.crme.2007.02.003

F. Hild, B. Raka, M. Baudequin, S. Roux, and F. Cantelaube, Multi-Scale Displacement Field Measurements of Compressed Mineral Wool Samples by Digital Image Correlation, Appl. Optics IP, pp.41-73, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00002901

S. Bergonnier, F. Hild, and S. Roux, Digital image correlation used for mechanical tests on crimped glass wool samples, The Journal of Strain Analysis for Engineering Design, vol.32, issue.2, pp.185-197, 2005.
DOI : 10.1243/030932405X7773

URL : https://hal.archives-ouvertes.fr/hal-00013799

S. Roux and F. Hild, Stress intensity factor measurements from digital image correlation: post-processing and integrated approaches, International Journal of Fracture, vol.40, issue.1, pp.141-157, 2006.
DOI : 10.1007/s10704-006-6631-2

URL : https://hal.archives-ouvertes.fr/hal-00013818

D. Claire, F. Hild, and S. Roux, A finite element formulation to identify damage fields: the equilibrium gap method, International Journal for Numerical Methods in Engineering, vol.61, issue.2, pp.61-63, 2004.
DOI : 10.1002/nme.1057

URL : https://hal.archives-ouvertes.fr/hal-00002899

S. Roux and F. Hild, From image analysis to damage constitutive law identification, NDT.net 11 [12] (2006) roux.pdf. See also S. Roux and F. Hild, Digital Image Mechanical Identification (DIMI), to appear in Exp, Mech, 2007.

M. A. Sutton, S. R. Mcneill, J. D. Helm, and Y. J. Chao, Advances in Two-Dimensional and Three-Dimensional Computer Vision
DOI : 10.1007/3-540-48800-6_10

J. Orteu, T. Cutard, D. Garcia, E. Cailleux, and L. Robert, Application of Stereovision to the Mechanical Characterisation of Ceramic Refractories Reinforced with Metallic Fibres, Strain, vol.551552, issue.2, p.43, 2007.
DOI : 10.1111/j.1475-1305.2007.00322.x

N. Guerrero, M. E. Marante, R. Picón, and J. Flórez-lópez, Model of local buckling in steel hollow structural elements subjected to biaxial bending, Journal of Constructional Steel Research, vol.63, issue.6, pp.63-69, 2007.
DOI : 10.1016/j.jcsr.2006.08.006