M. Mansoor, I. Islam, and A. Tauqir, Restricted life of after burner manifold assemblies due to stress raisers, Eng. Fail, Analysis, vol.14, pp.1280-1285, 2007.

L. Rémy, A. Alam, N. Haddar, A. Köster, and N. Marchal, Growth of small cracks and prediction of lifetime in high-temperature alloys, Materials Science and Engineering: A, vol.468, issue.470, pp.470-510, 2007.
DOI : 10.1016/j.msea.2006.08.133

T. Beck, D. Lohe, J. Luft, and I. Henne, Damage mechanisms of cast Al???Si???Mg alloys under superimposed thermal???mechanical fatigue and high-cycle fatigue loading, Materials Science and Engineering: A, vol.468, issue.470, pp.470-184, 2007.
DOI : 10.1016/j.msea.2006.05.177

V. Firouzdor, M. Rajabi, E. Nejati, and F. Khomamizadeh, Effect of microstructural constituents on the thermal fatigue life of A319 aluminum alloy, Materials Science and Engineering: A, vol.454, issue.455, pp.454-455, 2007.
DOI : 10.1016/j.msea.2007.01.018

C. Li, H. Yu, G. Deng, X. Liu, and G. Wang, Numerical Simulation of Temperature Field and Thermal Stress Field of Work Roll During Hot Strip Rolling, Journal of Iron and Steel Research, International, vol.14, issue.5, pp.18-21, 2007.
DOI : 10.1016/S1006-706X(07)60067-3

W. S. Dai, M. Ma, and J. H. Chen, The thermal fatigue behavior and cracking characteristics of hot-rolling material, Materials Science and Engineering: A, vol.448, issue.1-2, pp.25-32, 2007.
DOI : 10.1016/j.msea.2006.09.003

A. Persson, S. Hogmark, and J. Bergstrom, Simulation and evaluation of thermal fatigue cracking of hot work tool steels, International Journal of Fatigue, vol.26, issue.10, pp.1095-1107, 2004.
DOI : 10.1016/j.ijfatigue.2004.03.005

X. Tong, H. Zhou, Z. Zhang, N. Sun, H. Shan et al., Effects of surface shape on thermal fatigue resistance of biomimetic non-smooth cast iron

G. Degallaix, P. Dufrenoy, J. Wong, P. Wicker, and F. Bumbieler, Failure mechanisms of TGV brake discs, Key Eng, pp.345-346, 2007.

C. H. Gao, J. M. Huang, X. Z. Lin, and X. S. Tang, Stress Analysis of Thermal Fatigue Fracture of Brake Disks Based on Thermomechanical Coupling, Journal of Tribology, vol.129, issue.3
DOI : 10.1115/1.2736437

X. W. Liu and W. J. Plumbridge, Damage Produced in Solder Alloys during Thermal Cycling, Journal of Electronic Materials, vol.53, issue.9, pp.1111-1120, 2007.
DOI : 10.1007/s11664-007-0122-8

R. L. Ubachs, P. J. Schreurs, and M. G. Geers, Elasto-viscoplastic nonlocal damage modelling of thermal fatigue in anisotropic lead-free solder, Mechanics of Materials, vol.39, issue.7, pp.39-685, 2007.
DOI : 10.1016/j.mechmat.2006.11.001

S. Taheri, Some Advances on Understanding of High Cycle Thermal Fatigue Crazing, Journal of Pressure Vessel Technology, vol.129, issue.3, pp.400-410, 2007.
DOI : 10.1115/1.2748822
URL : https://hal.archives-ouvertes.fr/hal-00089583

O. Ancelet, S. Chapuliot, G. Henaff, and S. Marie, Development of a test for the analysis of the harmfulness of a 3D thermal fatigue loading in tubes, International Journal of Fatigue, vol.29, issue.3
DOI : 10.1016/j.ijfatigue.2006.04.002

R. Desmorat, A. Kane, M. Seyedi, and J. Sermage, Two scale damage model and related numerical issues for thermo-mechanical High Cycle Fatigue, European Journal of Mechanics - A/Solids, vol.26, issue.6
DOI : 10.1016/j.euromechsol.2007.01.002
URL : https://hal.archives-ouvertes.fr/hal-00169928

. Schedler, Damage evaluation under thermal fatigue of a vertical target full scale component for the ITER divertor, J. Nuclear Mat, pp.367-370, 2007.

. Peniguel, Evaluation of the risk of damage in mixing zones: EDF R & D programme, Proceedings Fatigue, pp.1707-1714, 2002.

D. Jeulin, Modèles morphologiques de structures alátoires et changement d'´ echelle, 1991.

R. Gulino and S. L. Phoenix, Weibull strength statistics for graphite fibres measured from the break progression in a model graphite/glass/epoxy microcomposite, Journal of Materials Science, vol.58, issue.11, pp.3107-3118, 1991.
DOI : 10.1007/BF01124848

C. Denoual, G. Barbier, and F. Hild, A Probabilistic Approach for Fragmentation of Ceramics under Impact Loading See also, C. Denoual and F. Hild, A Damage Model for the Dynamic Fragmentation of Brittle Solids, Meth. Appl. Mech, pp.685-691, 1997.

J. Weiss, Endommagement en viscoplasticité cyclique sous chargement multiaxiaì a haute température d'un acier inoxydable austénitique, 1992.

B. Fedelich, A stochastic theory for the problem of multiple surface crack coalescence, International Journal of Fracture, vol.91, issue.1, pp.23-45, 1998.
DOI : 10.1023/A:1007431802050

C. Doudard, S. Calloch, P. Cugy, A. Galtier, and F. Hild, A probabilistic twoscale model for high cycle fatigue life predictions, Fat. Fract. Eng. Mat. Struct, pp.28-279, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00322496

A. Bataille and T. Magnin, Surface damage accumulation in low-cycle fatigue: Physical analysis and numerical modelling, Acta Metallurgica et Materialia, vol.42, issue.11, pp.11-3817, 1994.
DOI : 10.1016/0956-7151(94)90447-2

V. Maillot, Amorçage et propagation de réseaux de fissures de fatigue thermique dans un acier inoxydable austénitique de type X2 CrNi 18-09 (AISI 304 L), 2003.

D. J. Marsh, A THERMAL SHOCK FATIGUE STUDY OF TYPE 304 AND 316 STAINLESS STEELS, Fatigue & Fracture of Engineering Materials and Structures, vol.3, issue.2, pp.179-195, 1981.
DOI : 10.1111/j.1460-2695.1981.tb01119.x

C. Robertson, M. C. Fivel, and A. Fissolo, Dislocation substructure in 316L stainless steel under thermal fatigue up to 650 K, Materials Science and Engineering: A, vol.315, issue.1-2, pp.47-57, 2001.
DOI : 10.1016/S0921-5093(01)01201-1

C. Robertson, S. Chaise, and D. Nt, Bilan des essais de fatigue thermique avec contrainte de traction sur un acier austénitique, 2004.

F. Curtit and J. Stephan, Essais de fatigue thermique sur structures, Proceedings Congrès national Mecamat, pp.246-255, 2007.

K. J. Miller, Materials science perspective of metal fatigue resistance, Materials Science and Technology, vol.187, issue.65, pp.453-462, 1993.
DOI : 10.1111/j.1460-2695.1992.tb01259.x

L. Vincent, G. Perez-note, and D. Nt, Etude de la fatigue d'un acier inox aux faibles niveaux de chargement. Rapport d'avancement no, 2004.

W. J. Dixon and A. M. Mood, A Method for Obtaining and Analyzing Sensitivity Data, Journal of the American Statistical Association, vol.43, issue.241, pp.109-126, 1948.
DOI : 10.2307/3001536

M. Mottot and M. Noblecourt, Etude du comportement en fatigue oligocyclique ` a 165 ? C et 320 ? C du 304L pour de faibles niveaux de déformations (? ? 1%), (CEA Saclay, technical note, 2001.

M. Mottot and M. Noblecourt, Etude du comportement en fatigue oligocyclique d'aciers de type Z2 CN 18-10 (304L) ` a 20 ? C et 300 ? C, (CEA Saclay, technical note, 2002.

X. Wang and S. B. Lambert, Stress intensity factors for low aspect ratio semi-elliptical surface cracks in finite-thickness plates subjected to nonuniform stresses, Engineering Fracture Mechanics, vol.51, issue.4, pp.51-55, 1995.
DOI : 10.1016/0013-7944(94)00311-5

S. M. Seyedi, Formation, propagation et coalescence dans un réseau de fissures en fatigue thermique, 2004.

N. Malésys, M. Seyedi, L. Vincent, and F. Hild, On the formation of crack networks in high cycle fatigue, Comptes Rendus M??canique, vol.334, issue.7, pp.419-424, 2006.
DOI : 10.1016/j.crme.2006.05.005

B. Widom, Random Sequential Addition of Hard Spheres to a Volume, The Journal of Chemical Physics, vol.44, issue.10, pp.3888-3894, 1966.
DOI : 10.1063/1.1726548

J. Quintanilla and S. Torquato, Local volume fraction fluctuations in random media, The Journal of Chemical Physics, vol.106, issue.7, pp.2741-2751, 1997.
DOI : 10.1063/1.473414

J. W. Hutchinson and Z. Suo, Mixed Mode Cracking in Layered Materials, pp.63-191, 1992.
DOI : 10.1016/S0065-2156(08)70164-9