O. Ozdemir, M. Denizel, and V. Guide, Recovery decisions of a producer in a legislative disposal fee environment, European Journal of Operational Research, vol.216, issue.2, pp.293-300, 2012.
DOI : 10.1016/j.ejor.2011.07.035

S. Mcgovern and S. Gupta, The disassembly line: balancing and modeling, 2011.

O. Battaïa and A. Dolgui, A taxonomy of line balancing problems and their solutionapproaches, International Journal of Production Economics, vol.142, issue.2, pp.259-77, 2013.
DOI : 10.1016/j.ijpe.2012.10.020

A. Meacham, R. Uzsoy, and U. Venkatadri, Optimal disassembly configurations for single and multiple products, Journal of Manufacturing Systems, vol.18, issue.5, pp.311-333, 1999.
DOI : 10.1016/S0278-6125(00)87634-7

A. Gungor and S. Gupta, A solution approach to the disassembly line balancing problem in the presence of task failures, International Journal of Production Research, vol.39, issue.7, pp.1427-67, 2001.
DOI : 10.1080/00207540110052157

A. Gungor, S. Gupta, K. Pochampally, and S. Kamarthi, <title>Complications in disassembly line balancing</title>, Environmentally Conscious Manufacturing, pp.289-98, 2001.
DOI : 10.1117/12.417274
URL : http://www.coe.neu.edu/~smgupta/4193-44-SPIE.PDF

F. Altekin, L. Kandiller, and N. Ozdemirel, <title>Disassembly line balancing with limited supply and subassembly availability</title>, Environmentally Conscious Manufacturing III, pp.59-70, 2004.
DOI : 10.1117/12.516073

Y. Tang and M. Zhou, A systematic approach to design and operation of disassembly lines, IEEE Transactions on Automation Science and Engineering, vol.3, issue.3, pp.324-354, 2006.
DOI : 10.1109/TASE.2005.860989

S. Mcgovern and S. Gupta, A balancing method and genetic algorithm for disassembly line balancing, European Journal of Operational Research, vol.179, issue.3, pp.692-708, 2007.
DOI : 10.1016/j.ejor.2005.03.055

F. Altekin, L. Kandiller, and N. Ozdemirel, Profit-oriented disassembly-line balancing, International Journal of Production Research, vol.5, issue.10, pp.2675-93, 2008.
DOI : 10.1287/mnsc.11.7.727
URL : http://research.sabanciuniv.edu/8621/1/Altekin_et_al_2008_-_ProfitOrientedDisassemblyLineBalancing_-_Preprint.pdf

M. Tripathi, S. Agrawal, M. Pandey, R. Shankar, and M. Tiwari, Real world disassembly modeling and sequencing problem: Optimization by Algorithm of Self-Guided Ants (ASGA), Robotics and Computer-Integrated Manufacturing, vol.25, issue.3, pp.483-96, 2009.
DOI : 10.1016/j.rcim.2008.02.004

A. Koc, I. Sabuncuoglu, and E. Erel, Two exact formulations for disassembly line balancing problems with task precedence diagram construction using an AND/OR graph, IIE Transactions, vol.41, issue.10, pp.866-81, 2009.
DOI : 10.1016/j.ejor.2004.07.022

F. Altekin and C. Akkan, Task-failure-driven rebalancing of disassembly lines, International Journal of Production Research, vol.34, issue.10, pp.4955-76, 2012.
DOI : 10.1109/70.744614

Y. Ma, H. Jun, H. Kim, and D. Lee, Disassembly process planning algorithms for end-of-life product recovery and environmentally conscious disposal, International Journal of Production Research, vol.34, issue.23, pp.7007-7034, 2011.
DOI : 10.1109/70.843173

J. Rickli and J. Cameilio, Multi-objective partial disassembly optimization based on sequence feasibility, Journal of Manufacturing Systems, vol.32, issue.1, pp.281-93, 2013.
DOI : 10.1016/j.jmsy.2012.11.005

M. Ilgin and S. Gupta, Environmentally conscious manufacturing and product recovery (ECMPRO): A review of the state of the art, Journal of Environmental Management, vol.91, issue.3, pp.563-91, 2010.
DOI : 10.1016/j.jenvman.2009.09.037

E. Tuncel, A. Zeid, and S. Kamarthi, Solving large scale disassembly line balancing problem with uncertainty using reinforcement learning, Journal of Intelligent Manufacturing, vol.8, issue.3, pp.647-59, 2012.
DOI : 10.1023/A:1018500603358

A. Lambert, Disassembly sequencing: A survey, International Journal of Production Research, vol.41, issue.16, pp.3721-59, 2003.
DOI : 10.1080/0020754031000120078

M. Kang, M. Kwak, N. Cho, and Y. Hong, Automatic derivation of transition matrix for end-of-life decision making, International Journal of Production Research, vol.7, issue.2, pp.3269-98, 2010.
DOI : 10.1115/1.2899679

A. Aydemir-karadag and O. Turkbey, Multi-objective optimization of stochastic disassembly line balancing with station paralleling, Computers & Industrial Engineering, vol.65, issue.3, pp.413-438, 2013.
DOI : 10.1016/j.cie.2013.03.014

S. Agrawal and M. Tiwari, A collaborative ant colony algorithm to stochastic mixed-model U-shaped disassembly line balancing and sequencing problem, International Journal of Production Research, vol.46, issue.6, pp.1405-1434, 2008.
DOI : 10.1007/s00170-003-1590-5

Y. Tang, M. Zhou, E. Zussman, and R. Caudill, Disassembly modeling, planning, and application, Journal of Manufacturing Systems, vol.21, issue.3, pp.200-217, 2002.
DOI : 10.1016/S0278-6125(02)80162-5

N. Boysen, M. Fliedner, and A. Scholl, Assembly line balancing: Joint precedence graphs under high product variety, IIE Transactions, vol.66, issue.3, pp.183-93, 2009.
DOI : 10.1080/00207540110116273

D. Fazio, T. Whitney, and D. , Simplified generation of all mechanical assembly sequences, IEEE Journal on Robotics and Automation, vol.3, issue.6, pp.640-58, 1987.
DOI : 10.1109/JRA.1987.1087132

I. Baybars, A Survey of Exact Algorithms for the Simple Assembly Line Balancing Problem, Management Science, vol.32, issue.8, pp.909-941, 1986.
DOI : 10.1287/mnsc.32.8.909

S. Hu, J. Ko, L. Weyand, H. Elmaraghy, T. Lien et al., Assembly system design and operations for product variety, CIRP Annals, vol.60, issue.2, pp.715-748, 2011.
DOI : 10.1016/j.cirp.2011.05.004

R. Riggs and S. Hu, Disassembly Liaison Graphs Inspired by Word Clouds, Procedia CIRP, vol.7, pp.521-527, 2013.
DOI : 10.1016/j.procir.2013.06.026
URL : https://doi.org/10.1016/j.procir.2013.06.026

C. Kalayci and S. Gupta, Artificial bee colony algorithm for solving sequence-dependent disassembly line balancing problem, Expert Systems with Applications, vol.40, issue.18, pp.7231-7272, 2013.
DOI : 10.1016/j.eswa.2013.06.067

R. Riggs, J. X. Hu, and S. , Two-stage Sequence Generation for Partial Disassembly of Products with Sequence Dependent Task Times, Procedia CIRP, vol.29, pp.698-703, 2015.
DOI : 10.1016/j.procir.2015.02.047
URL : https://doi.org/10.1016/j.procir.2015.02.047

M. Bentaha, O. Battaïa, A. Dolgui, and S. Hu, Dealing with uncertainty in disassembly line design, CIRP Annals, vol.63, issue.1, pp.21-25, 2014.
DOI : 10.1016/j.cirp.2014.03.004
URL : https://hal.archives-ouvertes.fr/emse-00978385

M. Bentaha, O. Battaïa, and A. Dolgui, A sample average approximation method for disassembly line balancing problem under uncertainty, Computers & Operations Research, vol.51, pp.111-133, 2014.
DOI : 10.1016/j.cor.2014.05.006
URL : https://hal.archives-ouvertes.fr/emse-01083333

M. Bentaha, O. Battaïa, and A. Dolgui, An exact solution approach for disassembly line balancing problem under uncertainty of the task processing times, International Journal of Production Research, vol.2, issue.6, pp.1807-1825, 2015.
DOI : 10.1016/S0278-6125(00)80001-1
URL : https://hal.archives-ouvertes.fr/emse-01070085