2935 articles  [english version]
HAL : hal-00353148, version 2

Fiche concise  Récupérer au format
Optimal trajectory determination and tracking of an autoclave curing process: A model based approach
Dufour P., Touré Y., Michaud D. J., Dhurjati P. S.
in Proceedings of the 5th IFAC-IEEE European Control Conference (ECC) - European Control Conference (ECC), Karlsruhe : Germany (1999) - http://hal.archives-ouvertes.fr/hal-00353148
Versions disponibles :
Communications avec actes
Sciences de l'ingénieur/Automatique / Robotique
Sciences de l'ingénieur/Génie des procédés
Optimal trajectory determination and tracking of an autoclave curing process: A model based approach
Pascal Dufour () 1, Youssoufi Touré 2, Dennis J Michaud 3, Prasad S. Dhurjati 3
1 :  Laboratoire d'automatique et de génie des procédés (LAGEP)
http://www-lagep.cpe.fr/
CNRS : UMR5007 – Université Claude Bernard - Lyon I – École Supérieure Chimie Physique Électronique de Lyon
bât 308G ESCPE-Lyon, 2ème étage 43 bd du 11 Novembre 1918 69622 Villeurbanne Cedex
France
2 :  Laboratoire Vision et Robotique (LVR)
http://www.bourges.univ-orleans.fr/rech/lvr/
Université d'Orléans – Ecole Nationale Supérieure d'Ingénieurs de Bourges
IUT de Bourges 63, Av. De Lattre de Tassigny 18020 Bourges Cedex
France
3 :  Department of Chemical Engineering, University of Delaware (DoCE)
http://www.udel.edu
University of Delaware
Newark, DE 19716, USA
États-Unis
This work deals with a model-based approach to non-linear (NL) parabolic PDE control. We address two problems in the optimization and control of the autoclave lay-up curing process. The first is to find the best process trajectory corresponding to the shortest possible operating time. The second is to determine the process control required to track the optimized trajectory within the constraints of the system. In previous work, a simulation based approach was used called local criteria optimization (LCO). Here the former problem is stated as a constrained optimization problem. A predictive type approach with a penalty method is solved by the Levenberg-Marquardt (LM) algorithm. For the tracking problem, the well-known Internal Model Control (IMC) structure is used for the predictive control strategy. Finally, we show that a time-varying linear model around the optimal profile can be used for the on-line optimization.
Anglais
09/1999

Proceedings of the 5th IFAC-IEEE European Control Conference (ECC)
internationale
09/1999
Paper F1033-6

European Control Conference (ECC)
09/1999
Karlsruhe
Allemagne

Model predictive control – constrained optimization – distributed parameter system control – curing process.
The authors acknowledge the IFAC/IEEE for their copyright policies & self-archiving. More open archives publications of Pascal Dufour are available on: http://hal.archives-ouvertes.fr/DUFOUR-PASCAL-C-3926-2008

Liste des fichiers attachés à ce document : 
PDF
duf99-IFAC-IEEE-ECC-Karlsruhe-paper1033-6-paper.pdf(701.2 KB)
ANNEX
duf99-IFAC-IEEE-ECC-Karlsruhe-paper1033-6-talk.pdf(680.8 KB)