L'archive ouverte pluridisciplinaire HAL , est destinée au dépôt et à la diffusion d'articles scientifiques de niveau recherche, publiés ou non, et de thèses, émanant des établissements d'enseignement et de recherche français ou étrangers, des laboratoires publics ou privés.
Derniers Dépôts
Chimie
Économie et finance quantitative
Informatique
Mathématiques
Physique
Planète et Univers
Science non linéaire
Sciences cognitives
Sciences de l'environnement
Sciences de l'Homme et Société
Sciences de l'ingénieur
Sciences du Vivant
Statistiques
Au cours de ce travail, nous avons effectué une étude méthodologique pour la préparation de banques de triazoles, en utilisant la réaction de la chimie " clic ". Ces études ont démontré que la réaction entre un alcyne vrai activé et un azoture est possible dans les conditions sans solvant et sans catalyseur pour conduire un mélange d'isomères 1,4 et 1,5 avec un rendement moyen de 76%. Nous avons remarqué que l'addition des métaux (SiO2, MgCl2, Al2O3, FeCl3 et CuCl2) permettait d'améliorer les rendements des réactions, et on a observé que la silice est la meilleur catalyseur, alors que la catalyse au cuivre (I) donne une sélectivité complète pour l'isomère 1,4. Ce résultat est bien confirmé par l'étude de la régiosélectivité qui montre que les molécules contenant deux types d'alcynes (activé et non activé) peuvent êtres fonctionnalisés séquentiellement et sélectivement. Nous avons aussi préparé les bis-triazoles en deux étapes : la première sur l'alcyne activé sans catalyseur et la deuxième étape se fait sur l'alcyne non activé par catalyse au cuivre (I), ce qui permet de dire que les alcynes terminaux portant un groupement carbonyle en de la triple liaison sont beaucoup plus réactifs.Nous avons également pu étendre l'application de la catalyse supportée dans la réaction de Huisgen dans les domaines de la synthèse de dérivés de produits naturels et d'éthers couronne. En utilisant la synthèse classique et en flux continu, nous avons pu préparer des structures originales dérivées de l'acide quinique porteuse de cycles triazoliques. Ces composés seront testés pour leur activité biologique. Nous avons également entrepris la synthèse de dérivés nouveaux d'éthers couronnes azotes afin d'incorporer à ces structures des bras contenant un ou deux noyaux triazoles. L'obtention de ces substances permettra d'ouvrir l'étude de leur propriétés complexantes dans l'avenir
Les diverses perovskites de strontium-fer présentent de très fortes corrélations entre la structurecristalline et les phénomènes d'ordre de lacunes d'oxygènes, de charge, de spin et d'orbitales. Danscette thèse, nous avons réalisé une étude systématique des relations entre les ordres de charges etles ordres de spins selon les différents environnements cristallographiques rencontrés pour lescations Fe3+ et Fe4+ dans la phase Sr4Fe4O11, pour le cation Fe3+ dans les phases Sr3Fe2O6 et Sr2Fe2O10et pour le cation Fe2+ dans la phase SrFeO2. Les synthèses des phases polycristallines furent réaliséesvia des voies " solide " ou " sol-gel " en complément de la synthèse de cristaux préparés à l'aide d'unfour à image à fusion de zone verticale pour les phases Sr4Fe4O11 et Sr2Fe2O10. La qualité cristalline etchimique des oxydes fut contrôlée par diffraction de rayons X sur poudre et spectroscopieMössbauer alors que l'étude de la structure électronique de chaque phase a été réalisée à l'aide despectroscopie d'absorption de rayons X. Finalement, les structures magnétiques des phases Sr3Fe2O6et Sr4Fe4O11 sont aussi présentées.
Double-walled carbon nanotubes (DWNTs), produced by a catalytic chemical vapor deposition method, have been fluorinated using a volatile mixture of BrF3 and Br2. Optical absorption spectroscopic study on the product detected nonfluorinated nanotubes, which could correspond to the inner walls of DWNTs. The fluorinated DWNTs have been annealed in vacuum at fixed temperatures, and X-ray photoelectron spectroscopy showed almost no fluorine in the sample heated to 300 °C. Comparison between X-ray fluorescent C KR spectra of the pristine DWNT sample and the annealed fluorinated sample revealed change of the atomic structure of graphitic shells in the process of thermal defluorination.
We present a mathematical study of the order book as a multidimensional continuous- time Markov chain where the order flow is modeled by independent Poisson processes. Our aim is to bridge the gap between the microscopic description of price formation (agent- based modeling), and the Stochastic Differential Equations approach used classically to describe price evolution at macroscopic time scales. To do this, we rely on the theory of infinitesimal generators and Foster-Lyapunov stability criteria for Markov chains. We motivate our approach using an elementary example where the spread is kept constant ("perfect market making"). Then we compute the infinitesimal generator associated with the order book in a general setting, and link the price dynamics to the instantaneous state of the order book. In the last section, we prove that the order book is ergodic - in particular it has a stationary distribution - that it converges to its stationary state exponentially fast, and that the large-scale limit of the price process is a Brownian motion.
In this paper, we consider a discrete time economy where we assume that the short term interest rate follows a quadratic term structure of a regime switching asset process. The possible non-linear structure and the fact that the interest rate can have different economic or financial trends justify the interest of Regime Switching Quadratic Term Structure Model (RS-QTSM). Indeed, this regime switching process depends on the values of a Markov chain with a time dependent transition probability matrix which can well captures the different states (regimes) of the economy. We prove that under this modelling that the conditional zero coupon bond price admits also a quadratic term structure. Moreover, the stochastic coefficients which appear in this decomposition satisfy an explicit system of coupled stochastic backward recursions.
In this note, we cast a Hawkes process-based order book model into a markovian setting and; using techniques from the theory of Markov chains and stochastic stability, show that the order book is stable and leads to a diffusive price limit at large time scales.
The number of available genomic sequences is growing very fast, due to the development of massive sequencing techniques. Sequence identification is needed and contributes to the assessment of gene and species evolutionary relationships. Automated bioinformatics tools are thus necessary to carry out these identification operations in an accurate and fast way. We developed HoSeqI (Homologous Sequence Identification), a software environment allowing this kind of automated sequence identification using homologous gene family databases. HoSeqI is accessible through a Web interface (http://pbil.univ-lyon1.fr/software/HoSeqI/) allowing to identify one or several sequences and to visualize resulting alignments and phylogenetic trees. We also implemented another application, MultiHoSeqI, to quickly add a large set of sequences to a family database in order to identify them, to update the database, or to help automatic genome annotation. Lately, we developed an application, ChiSeqI (Chimeric Sequence Identification), to automate the processes of identification of bacterial 16S ribosomal RNA sequences and of detection of chimeric sequences.
Background Reconciliation methods compare gene trees and species trees to recover evolutionary events such as duplications, transfers and losses explaining the history and composition of genomes. It is well-known that gene trees inferred from molecular sequences can be partly erroneous due to incorrect sequence alignments as well as phylogenetic reconstruction artifacts such as long branch attraction. In practice, this leads reconciliation methods to overestimate the number of evolutionary events. Several methods have been proposed to circumvent this problem, by collapsing the unsupported edges and then resolving the obtained multifurcating nodes, or by directly rearranging the binary gene trees. Yet these methods have been defined for models of evolution accounting only for duplications and losses, i.e. can not be applied to handle prokaryotic gene families. Results We propose a reconciliation method accounting for gene duplications, losses and horizontal transfers, that specifically takes into account the uncertainties in gene trees by rearranging their weakly supported edges. Rearrangements are performed on edges having a low confidence value, and are accepted whenever they improve the reconciliation cost. We prove useful properties on the dynamic programming matrix used to compute reconciliations, which allows to speed-up the tree space exploration when rearrangements are generated by Nearest Neighbor Interchanges (NNI) edit operations. Experiments on synthetic data show that gene trees modified by such NNI rearrangements are closer to the correct simulated trees and lead to better event predictions on average. Experiments on real data demonstrate that the proposed method leads to a decrease in the reconciliation cost and the number of inferred events. Finally on a dataset of 30k gene families, this reconciliation method shows a ranking of prokaryotic phyla by transfer rates identical to that proposed by a different approach dedicated to transfer detection [BMCBIOINF 11:324, 2010, PNAS 109(13):4962-4967, 2012]. Conclusions Prokaryotic gene trees can now be reconciled with their species phylogeny while accounting for the uncertainty of the gene tree. More accurate and more precise reconciliations are obtained with respect to previous parsimony algorithms not accounting for such uncertainties [LNCS 6398:93-108, 2010, BIOINF 28(12): i283-i291, 2012]. A software implementing the method is freely available at http://www.atgc-montpellier.fr/Mowgli/.
We construct new families of elliptic curves over \(\FF_{p^2}\) with efficiently computable endomorphisms, which can be used to accelerate elliptic curve-based cryptosystems in the same way as Gallant--Lambert--Vanstone (GLV) and Galbraith--Lin--Scott (GLS) endomorphisms. Our construction is based on reducing \(\QQ\)-curves---curves over quadratic number fields without complex multiplication, but with isogenies to their Galois conjugates---modulo inert primes. As a first application of the general theory we construct, for every \(p > 3\), two one-parameter families of elliptic curves over \(\FF_{p^2}\) equipped with endomorphisms that are faster than doubling. Like GLS (which appears as a degenerate case of our construction), we offer the advantage over GLV of selecting from a much wider range of curves, and thus finding secure group orders when \(p\) is fixed. Unlike GLS, we also offer the possibility of constructing twist-secure curves. Among our examples are prime-order curves equipped with fast endomorphisms, with almost-prime-order twists, over \(\FF_{p^2}\) for \(p = 2^{127}-1\) and \(p = 2^{255}-19\).
In this paper we investigate the regularity properties of weighted Bergman projections for smoothly bounded pseudo-convex domains of finite type in $\mathbb{C}^{n}$. The main result is obtained for weights equal to a non negative rational power of the absolute value of a special defining function $\rho$ of the domain: we prove (weighted) Sobolev-$L^{p}$ and Lipchitz estimates for domains in $\mathbb{C}^{2}$ (or, more generally, for domains having a Levi form of rank $\geq n-2$ and for ''decoupled'' domains) and for convex domains. In particular, for these defining functions, we generalize results obtained by A. Bonami \& S. Grellier and D. C. Chang \& B. Q. Li. We also obtain a general (weighted) Sobolev-$L^{2}$ estimate.
We construct new families of elliptic curves over \(\FF_{p^2}\) with efficiently computable endomorphisms, which can be used to accelerate elliptic curve-based cryptosystems in the same way as Gallant--Lambert--Vanstone (GLV) and Galbraith--Lin--Scott (GLS) endomorphisms. Our construction is based on reducing \(\QQ\)-curves---curves over quadratic number fields without complex multiplication, but with isogenies to their Galois conjugates---modulo inert primes. As a first application of the general theory we construct, for every \(p > 3\), two one-parameter families of elliptic curves over \(\FF_{p^2}\) equipped with endomorphisms that are faster than doubling. Like GLS (which appears as a degenerate case of our construction), we offer the advantage over GLV of selecting from a much wider range of curves, and thus finding secure group orders when \(p\) is fixed. Unlike GLS, we also offer the possibility of constructing twist-secure curves. Among our examples are prime-order curves equipped with fast endomorphisms, with almost-prime-order twists, over \(\FF_{p^2}\) for \(p = 2^{127}-1\) and \(p = 2^{255}-19\).
Fifty years ago, FitzHugh introduced a phase portrait that became famous for a twofold reason: it captured in a physiological way the qualitative behavior of Hodgkin-Huxley model and it revealed the power of simple dynamical models to unfold complex firing patterns. To date, in spite of the enormous progresses in qualitative and quantitative neural modeling, this phase portrait has remained a core picture of neuronal excitability. Yet, a major difference between the neurophysiology of 1961 and of 2011 is the recognition of the prominent role of calcium channels in firing mechanisms. We show that including this extra current in Hodgkin-Huxley dynamics leads to a revision of FitzHugh-Nagumo phase portrait that affects in a fundamental way the reduced modeling of neural excitability. The revisited model considerably enlarges the modeling power of the original one. In particular, it captures essential electrophysiological signatures that otherwise require non-physiological alteration or considerable complexification of the classical model. As a basic illustration, the new model is shown to highlight a core dynamical mechanism by which calcium channels control the two distinct firing modes of thalamocortical neurons.
The LHCb experiment is a specialized experiment for B and D physics at the CERN LHC. The layout of the experiment and the various components are described, with an overview of their performance. Global running conditions and performance are also shown. The motivation for the foreseen detector upgrade is presented, together with the proposed new detectors, to be installed during Long Shutdown 2, in 2018.
The W mass is a crucial parameter in the Standard Model (SM) of particle physics, providing constraints on the mass of the Higgs boson as well as on new physics models via quantum loop corrections. On the other hand, any deviation of the triple gauge boson couplings (TGC) from their values predicted by the SM would be also an indication for new physics. We present recent measurements on W boson mass and searches for anomalous TGC (aTGC) in Wγ, Zγ, WW, WZ and ZZ at Fermilab Tevatron both by CDF and DØ Collaborations. The CDF Collaboration has measured the W boson mass using data corresponding to 2.2 fb−1 of integrated luminosity. The measurement, performed using electron and muon decays of W boson, yields a mass of MW = 80387 ± 19 MeV. The DØ Collaboration has measured MW = 80367 ± 26 MeV with data corresponding to 4.3 fb−1 of integrated luminosity in the channel W → ev. The combination with an earlier DØ result, using independant data sample at 1 fb−1 of integrated luminosity, yields MW = 80375 ± 23 MeV. The limits on anomalous TGCs parameters are consistent with the SM expectations.
An experimental approach is presented in order to study the evolution of the spreading of a macro-drop of liquid metal. The objective of this work is to supply qualitative and quantitative information during the deposit of liquid metal in static pulsed Gas Metal Arc Welding (P-GMAW). The experimental results are analyzed in the light of dimensionless numbers in order to identify the involved physical mecanisms and appreciate the heat and mass e ects on the behavior of such a macro-drop.
Several characteristic waves detected by seismographs in Antarctic stations have been recognized as originating from the physical interaction between the solid earth and the atmosphere-ocean-cryosphere system surrounding the Antarctic and may be used as a proxy for characterizing ocean wave climate. A Chaparral-type infrasound sensor was installed at Syowa Station (SYO; 39.6E, 69.0S), East Antarctica, in April 2008 during the International Polar Year (IPY2007-2008). Matching data are also available for this time period from the existing broadband seismic recorder located close by. Continuous infrasound data for 2008-2009 include background signals (microbaroms) with a broad peak in the wave period between the values of 4 and 10 s. Signals with the same period are recorded by the broadband seismograph at SYO (microseisms). This period band is identified as double-frequency microseisms/baroms (DFM). The DFM have relatively lower amplitudes during winter. We suggest that this is due to the sea-ice extent around the coast causing a decreased ocean loading effect. In contrast, the single frequency microseisms/baroms with a peak in period between 12 and 30 s are observed under storm conditions, particularly in winter. On the infrasound data, stationary signals are identified with harmonic overtones at a few Hertz to lowermost human audible band, which we suggest is due to local effects such as sea-ice cracking and vibration. Microseism measurements are a useful proxy for characterizing ocean wave climate, complementing other oceanographic and geophysical data. At SYO, continuous monitoring by both broadband seismograph and infrasound contributes to the Federation of Digital Seismographic Networks, the Comprehensive Nuclear-Test-Ban Treaty in the high southern latitudes and the Pan-Antarctic Observations System under the Scientific Committee on Antarctic Research.
Three types of pathways (degradation-recondensation, natural sulphurization and selective preservation) are commonly considered for the formation of kerogen dispersed in sedimentary rocks. A fourth pathway has been recently put forward, however, from studies on Recent marine sediments, the so-called sorptive protection mechanism. This pathway is based on the adsorption of otherwise labile organic compounds onto minerals, thus preventing their diagenetic degradation and promoting their subsequent condensation into kerogen. The main results of the present study are derived from a combination of microscopic and pyrolytic methods applied on a Cenomanian kerogen. They provide (i) evidence, on an ancient material, for a crucial role of the mineral matrix both in organic matter (OM) preservation during kerogen formation and in kerogen stability once formed, (ii) indications that the dominant protective process likely involves physical protection by minerals, resulting from alternation of organic and clay nanolayers of approximately 100 nm in thickness, rather than OM adsorption as molecular monolayers and (iii) observations of the relatively poor stability of an isolated kerogen, contrary to the inertness commonly assumed for fossil macromolecular organic matter.
An efficient numerical method to compute solitary wave solutions to the free surface Euler equations is reported. It is based on the conformal mapping technique combined with an efficient Fourier pseudo-spectral method. The resulting nonlinear equation is solved via the Petviashvili iterative scheme. The computational results are compared to some existing approaches, such as the Tanaka method and Fenton's high-order asymptotic expansion. Several important integral quantities are numerically computed for a large range of amplitudes. The integral representation of the velocity and acceleration fields in the bulk of the fluid is also provided.
An efficient numerical method to compute solitary wave solutions to the free surface Euler equations is reported. It is based on the conformal mapping technique combined with an efficient Fourier pseudo-spectral method. The resulting nonlinear equation is solved via the Petviashvili iterative scheme. The computational results are compared to some existing approaches, such as the Tanaka method and Fenton's high-order asymptotic expansion. Several important integral quantities are numerically computed for a large range of amplitudes. The integral representation of the velocity and acceleration fields in the bulk of the fluid is also provided.
An improved Lozi function with alternate coefficients has been proposed. The modifications in the model allow to remove the holes in the attractor which are not desirable, but appeared in the previous Lozi function; in this way, an everywhere dense attractor can be obtained. Moreover, the strong sensitivity to the type of binarisation (conversion of real values to 0 and 1) has been demonstrated; this conversion to binary numbers is instrumental to apply the NIST tests for randomness. The results have been validated and compared via NIST tests, for the different methods of quantization. Finally, is has been verfied that the multi-random properties of the output signal have been improved thanks to the following strategies : under-sampling of the output signal, and the system order increasing. Keywords. Nonlinear dynamical system, ring-coupled map, Lozi function, NIST tests, discrete-time map, dense chaotic attractor, pseudo random number generator 1 I
The extreme characteristics of long wave run-up are studied in this paper. First we give a brief overview of the existing theory which is mainly based on the hodograph transformation (Carrier & Greenspan, 1958). Then, using numerical simulations, we build on the work of Stefanakis et al. (2011) for an infinite sloping beach and we find that resonant run-up amplification of monochromatic waves is robust to spectral perturbations of the incoming wave and resonant regimes do exist for certain values of the frequency. In the setting of a finite beach attached to a constant depth region, resonance can only be observed when the incoming wavelength is larger than the distance from the undisturbed shoreline to the seaward boundary. Wavefront steepness is also found to play a role in wave run-up, with steeper waves reaching higher run-up values.
Fifty years ago, FitzHugh introduced a phase portrait that became famous for a twofold reason: it captured in a physiological way the qualitative behavior of Hodgkin-Huxley model and it revealed the power of simple dynamical models to unfold complex firing patterns. To date, in spite of the enormous progresses in qualitative and quantitative neural modeling, this phase portrait has remained a core picture of neuronal excitability. Yet, a major difference between the neurophysiology of 1961 and of 2011 is the recognition of the prominent role of calcium channels in firing mechanisms. We show that including this extra current in Hodgkin-Huxley dynamics leads to a revision of FitzHugh-Nagumo phase portrait that affects in a fundamental way the reduced modeling of neural excitability. The revisited model considerably enlarges the modeling power of the original one. In particular, it captures essential electrophysiological signatures that otherwise require non-physiological alteration or considerable complexification of the classical model. As a basic illustration, the new model is shown to highlight a core dynamical mechanism by which calcium channels control the two distinct firing modes of thalamocortical neurons.
This paper studies the excitability properties of a generalized FitzHugh-Nagumo model. The model differs from the classical FitzHugh-Nagumo model in that it accounts for the effect of cooperative gating variables such as activation of calcium currents. Excitability is explored by unfolding a pitchfork bifurcation that is shown to organize five different types of excitability. In addition to the three classical types of neuronal excitability, two novel types are described and distinctly associated to the presence of cooperative variables.
Les tâches d'empan de mémoire de travail sont des tâches dans lesquelles des items doivent être maintenus en mémoire à court terme pendant qu'un traitement concurrent est effectué. Le but de la présente étude était de déterminer si, comme le soutient le modèle de partage temporel des ressources (Barrouillet, Bernardin, & Camos, 2004), les traitements gênent le maintien parce que les deux composantes entrent en compétition pour des processus communs ou plus simplement parce que les stratégies de maintien des items à rappeler sont perturbées par l'intrusion de l'information à traiter simultanément. Quatre-vingt sujets adultes étaient soumis à une tâche d'empan où ils devaient maintenir des lettres en même temps qu'ils devaient juger soit de la parité soit de la position spatiale de nombre présentés successivement à l'écran. Par ailleurs, ces nombres apparaissaient à un rythme régulier et donc prévisible ou bien aléatoire. Conformément à nos attentes, et contrairement à l'hypothèse d'une perturbation des stratégies de maintien, les jugements de parité qui nécessitent des récupérations en mémoire entraînaient de plus faibles empans que la tâche spatiale qui ne requiert qu'une sélection de réponse alors que le rythme de réalisation de la tâche secondaire n'avait pas d'effet sur les empans.
Several characteristic waves detected by seismographs in Antarctic stations have been recognized as originating from the physical interaction between the solid earth and the atmosphere-ocean-cryosphere system surrounding the Antarctic and may be used as a proxy for characterizing ocean wave climate. A Chaparral-type infrasound sensor was installed at Syowa Station (SYO; 39.6E, 69.0S), East Antarctica, in April 2008 during the International Polar Year (IPY2007-2008). Matching data are also available for this time period from the existing broadband seismic recorder located close by. Continuous infrasound data for 2008-2009 include background signals (microbaroms) with a broad peak in the wave period between the values of 4 and 10 s. Signals with the same period are recorded by the broadband seismograph at SYO (microseisms). This period band is identified as double-frequency microseisms/baroms (DFM). The DFM have relatively lower amplitudes during winter. We suggest that this is due to the sea-ice extent around the coast causing a decreased ocean loading effect. In contrast, the single frequency microseisms/baroms with a peak in period between 12 and 30 s are observed under storm conditions, particularly in winter. On the infrasound data, stationary signals are identified with harmonic overtones at a few Hertz to lowermost human audible band, which we suggest is due to local effects such as sea-ice cracking and vibration. Microseism measurements are a useful proxy for characterizing ocean wave climate, complementing other oceanographic and geophysical data. At SYO, continuous monitoring by both broadband seismograph and infrasound contributes to the Federation of Digital Seismographic Networks, the Comprehensive Nuclear-Test-Ban Treaty in the high southern latitudes and the Pan-Antarctic Observations System under the Scientific Committee on Antarctic Research.
Three types of pathways (degradation-recondensation, natural sulphurization and selective preservation) are commonly considered for the formation of kerogen dispersed in sedimentary rocks. A fourth pathway has been recently put forward, however, from studies on Recent marine sediments, the so-called sorptive protection mechanism. This pathway is based on the adsorption of otherwise labile organic compounds onto minerals, thus preventing their diagenetic degradation and promoting their subsequent condensation into kerogen. The main results of the present study are derived from a combination of microscopic and pyrolytic methods applied on a Cenomanian kerogen. They provide (i) evidence, on an ancient material, for a crucial role of the mineral matrix both in organic matter (OM) preservation during kerogen formation and in kerogen stability once formed, (ii) indications that the dominant protective process likely involves physical protection by minerals, resulting from alternation of organic and clay nanolayers of approximately 100 nm in thickness, rather than OM adsorption as molecular monolayers and (iii) observations of the relatively poor stability of an isolated kerogen, contrary to the inertness commonly assumed for fossil macromolecular organic matter.
An efficient numerical method to compute solitary wave solutions to the free surface Euler equations is reported. It is based on the conformal mapping technique combined with an efficient Fourier pseudo-spectral method. The resulting nonlinear equation is solved via the Petviashvili iterative scheme. The computational results are compared to some existing approaches, such as the Tanaka method and Fenton's high-order asymptotic expansion. Several important integral quantities are numerically computed for a large range of amplitudes. The integral representation of the velocity and acceleration fields in the bulk of the fluid is also provided.
Despite the existence of many studies about the different aspects of fixation in creativity and design reasoning, the underlying mechanisms of fixation, i.e., the processes that interfere during creative reasoning and lead one to become fixated on a small number of unvaried solutions, remain unclear. In this paper, we propose a theoretical framework to model fixation based on C-K design theory, which states that fixation is characterised as a set of restrictive heuristics activated in creative reasoning. We applied our framework in a set of experiments. We demonstrated how this framework makes sense of the varieties of fixation in design processes. We conclude by proposing three capabilities to understand fixation and overcome it: restrictive heuristics development, inhibitory control and expansion.
In France, one of ten recently-hired workers works in retailing. The literature provides evidence about the screening criteria used to fill low-wage vacancies in stores. However, neither the stage when criteria matter nor the forefront role of information channels (direct applications, word-of-mouth, employment agency and job ads) has been well explored. Drawing on 35 interviews conducted in 2010-2011, with actors involved in recruitment activities and with recently-hired workers in large stores in Greater Paris, this article explores the initial interaction between job seekers and recruiters. It is argued that the screening criteria vary according to the way employers received information about applicants and first interact with them (by mail, phone or face-to-face). This contribution highlights the importance of walk-in applications, which prioritize selection based on residence, appearances and availability. Changes in the first interaction impact the whole selection process and may change the profile of the workers hired.
This article examines the role of Internet based labour market intermediaries in coordinating job seeker/employee interactions. A twofold analysis examines on the one hand the matchmaking tools determining applicants' access to job ads, and on the other, the content of ads posted on the web. Observations reveal that the information available to applicants is subject to a high degree of filtering achieved through the use of pre-defined lists, keywords or more frequently, input fields. A comparative analysis of job offers posted on the Internet with those posted in newspapers shows that search engine toolkits have a considerable impact on ad content which is generally more standardized and quantified in the former than in the latter. Furthermore, a comparison between French and British ads demonstrates that the institutional context influences the actions taken by job boards. In contrast to Great Britain, France more frequently uses matching markers aimed at selecting applicants than those providing detailed information on the job offer. Today, French job boards thus contribute in weakening applicants' position on labour markets.
An experimental approach is presented in order to study the evolution of the spreading of a macro-drop of liquid metal. The objective of this work is to supply qualitative and quantitative information during the deposit of liquid metal in static pulsed Gas Metal Arc Welding (P-GMAW). The experimental results are analyzed in the light of dimensionless numbers in order to identify the involved physical mecanisms and appreciate the heat and mass e ects on the behavior of such a macro-drop.
Several compositions of metal cored filler wire were manufactured to define the best welding conditions for homogeneous welding, by Gas Metal Arc Welding (GMAW) process, of a modified AISI 444 ferritic stainless steel dedicated to automotive exhaust manifold applications. The patented grade is know under APERAM trade name K44X and has been developed to present improved high temperature fatigue properties. All filler wires investigated contained 19%Cr and 1.8%Mo, equivalent to the base metal K44X chemistry, but various titanium and niobium contents. Chemical analyses and microstructural observations of fusion zones revealed the need of a minimum Ti content of 0.15% to obtain a completely equiaxed grain structure. This structure conferred on the fusion zone a good ductility even in the as-welded state at room temperature. Unfortunately, titanium additions decreased the oxidation resistance at 950°C if no significant Nb complementary alloying was made. The combined high Ti and Nb additions made it possible to obtain for the welded structure, after optimized heat treatment, high temperature tensile strengths and ductility for the fusion zones and assemblies, rather close to those of the base metal. 950°C aging heat treatment was necessary to restore significantly the ductility of the as welded structure. Both fusion zone and base metal presented rather homogenized properties. Finally, with the optimized composition of the cored filler wire - 0.3 Ti minimum (i.e. 0.15% in the fusion zone) and high Nb complementary additions, the properties, including the thermal fatigue strength, of the K44X assemblies are excellent.
Seven compositions of metal cored filler wires for Gas Metal Arc Welding (GMAW), containing the same weight percent of chromium (Cr) and molybdenum (Mo) as 444 steel, but with different titanium (Ti) and niobium (Nb) contents were investigated. Experimental results pointed out that the filler wire Ti content required to be twice time more than the amount expected in the deposited metal. This was due to the low Ti transfer ratio during arc welding. Moreover, Ti increased the wetting angle and promoted penetration. It was supposed that Ti affected the weld pool surface tension what led to inward Marangoni convection. Columnar to equiaxed grain transiton (CET) was also promoted thanks to the precipitation in the weld pool of Ti rich refractory compounds which act as heterogeneous nucleation sites for equiaxed grains. A minimum 0.3% Ti was required in the filler wire to form a completely equiaxed grain structure in the fusion zone. Niobium in the filler wire did not seem to have any effect on penetration, wetting and grain structure of the fusion zone.
The number of available genomic sequences is growing very fast, due to the development of massive sequencing techniques. Sequence identification is needed and contributes to the assessment of gene and species evolutionary relationships. Automated bioinformatics tools are thus necessary to carry out these identification operations in an accurate and fast way. We developed HoSeqI (Homologous Sequence Identification), a software environment allowing this kind of automated sequence identification using homologous gene family databases. HoSeqI is accessible through a Web interface (http://pbil.univ-lyon1.fr/software/HoSeqI/) allowing to identify one or several sequences and to visualize resulting alignments and phylogenetic trees. We also implemented another application, MultiHoSeqI, to quickly add a large set of sequences to a family database in order to identify them, to update the database, or to help automatic genome annotation. Lately, we developed an application, ChiSeqI (Chimeric Sequence Identification), to automate the processes of identification of bacterial 16S ribosomal RNA sequences and of detection of chimeric sequences.
Background Reconciliation methods compare gene trees and species trees to recover evolutionary events such as duplications, transfers and losses explaining the history and composition of genomes. It is well-known that gene trees inferred from molecular sequences can be partly erroneous due to incorrect sequence alignments as well as phylogenetic reconstruction artifacts such as long branch attraction. In practice, this leads reconciliation methods to overestimate the number of evolutionary events. Several methods have been proposed to circumvent this problem, by collapsing the unsupported edges and then resolving the obtained multifurcating nodes, or by directly rearranging the binary gene trees. Yet these methods have been defined for models of evolution accounting only for duplications and losses, i.e. can not be applied to handle prokaryotic gene families. Results We propose a reconciliation method accounting for gene duplications, losses and horizontal transfers, that specifically takes into account the uncertainties in gene trees by rearranging their weakly supported edges. Rearrangements are performed on edges having a low confidence value, and are accepted whenever they improve the reconciliation cost. We prove useful properties on the dynamic programming matrix used to compute reconciliations, which allows to speed-up the tree space exploration when rearrangements are generated by Nearest Neighbor Interchanges (NNI) edit operations. Experiments on synthetic data show that gene trees modified by such NNI rearrangements are closer to the correct simulated trees and lead to better event predictions on average. Experiments on real data demonstrate that the proposed method leads to a decrease in the reconciliation cost and the number of inferred events. Finally on a dataset of 30k gene families, this reconciliation method shows a ranking of prokaryotic phyla by transfer rates identical to that proposed by a different approach dedicated to transfer detection [BMCBIOINF 11:324, 2010, PNAS 109(13):4962-4967, 2012]. Conclusions Prokaryotic gene trees can now be reconciled with their species phylogeny while accounting for the uncertainty of the gene tree. More accurate and more precise reconciliations are obtained with respect to previous parsimony algorithms not accounting for such uncertainties [LNCS 6398:93-108, 2010, BIOINF 28(12): i283-i291, 2012]. A software implementing the method is freely available at http://www.atgc-montpellier.fr/Mowgli/.
The development of endocavitary dual-mode probes is essential for the accurate treatment of many deep seated cancers which require a high imaging resolution and the capacity to selectively treat focal areas in the region of interest. The MULTIP project is aimed at using state-of-art piezoelectric technologies to design dual-mode ultrasonic probes for cancer-foci treatment and monitoring. In order to allow an efficient surgery planning, the technical study has been accompanied by a volume processing study permitting the design of the ultrasonic imaging/therapy process based on high-resolutionhigh-quality MRI images. Several prototypes were designed based on a simulation study and implemented: 1) two successive wide-band dual-mode transducer allowing imaging at high resolution (6 MHz) on a wide field of view, and therapy at 3 MHz with a good transduction efficiency (48% and 70%); 2) a therapy-only transducer matrix adapted to the desired curvature with a high transduction efficiency (70%). Finally, a registration study of MRI volumes on ultrasound volumes has shown that, because of the texture of the ultrasound images, it is more efficient to search at registering the surfaces of the volumes once they have been segmented in each modality, rather than trying to register the two data volumes directly.
In approachability with full monitoring there are two types of conditions that are known to be equivalent for convex sets: a primal and a dual condition. The primal one is of the form: a set C is approachable if and only all containing half-spaces are approachable in the one-shot game; while the dual one is of the form: a convex set C is approachable if and only if it intersects all payoff sets of a certain form. We consider approachability in games with partial monitoring. In previous works (Perchet 2011; Mannor et al. 2011) we provided a dual characterization of approachable convex sets; we also exhibited efficient strategies in the case where C is a polytope. In this paper we provide primal conditions on a convex set to be approachable with partial monitoring. They depend on a modified reward function and lead to approachability strategies, based on modified payoff functions, that proceed by projections similarly to Blackwell's (1956) strategy; this is in contrast with previously studied strategies in this context that relied mostly on the signaling structure and aimed at estimating well the distributions of the signals received. Our results generalize classical results by Kohlberg 1975 (see also Mertens et al. 1994) and apply to games with arbitrary signaling structure as well as to arbitrary convex sets.
Présentation du calcul de la distance intertextuelle et de deux méthodes de classification (classification hiérarchique ascendante, analyse arborée). Caractérisation du vocabulaire spécifique des différentes classes. Application à un groupe d'entretiens sur le confort électrique.
We consider supervised learning problems within the positive-definite kernel framework, such as kernel ridge regression, kernel logistic regression or the support vector machine. With kernels leading to infinite-dimensional feature spaces, a common practical limiting difficulty is the necessity of computing the kernel matrix, which most frequently leads to algorithms with running time at least quadratic in the number of observations n, i.e., O(n^2). Low-rank approximations of the kernel matrix are often considered as they allow the reduction of running time complexities to O(p^2 n), where p is the rank of the approximation. The practicality of such methods thus depends on the required rank p. In this paper, we show that in the context of kernel ridge regression, for approximations based on a random subset of columns of the original kernel matrix, the rank p may be chosen to be linear in the degrees of freedom associated with the problem, a quantity which is classically used in the statistical analysis of such methods, and is often seen as the implicit number of parameters of non-parametric estimators. This result enables simple algorithms that have sub-quadratic running time complexity, but provably exhibit the same predictive performance than existing algorithms, for any given problem instance, and not only for worst-case situations.
À l'attention du déposant
Le dépôt doit être effectué en accord avec les co-auteurs et dans le respect de la politique des éditeurs
La mise en ligne est assujettie à une modération, la direction de HAL se réservant le droit de refuser les articles ne correspondant pas aux critères de l'archive (voir le guide du déposant )
Tout dépôt est définitif, aucun retrait ne sera effectué après la mise en ligne de l'article
Consulter le ManuHAL Les fichiers textes au format pdf ou les fichiers images composant votre dépôt sont maintenant envoyés au CINES dans un contexte d'archivage à long terme.
À l'attention des lecteurs
Dans un contexte de diffusion électronique, tout auteur conserve ses droits intellectuels, notamment le fait de devoir être correctement cité et reconnu comme l'auteur d'un document.
Déposer
La convention de partenariat en faveur des archives ouvertes et de la plateforme mutualisée HAL a été signée le 2 avril 2013 :
en savoir plus
Déposer
Documents avec texte intégral
Evolution des dépôts
Contact
Actualités
À voir
