Feedrate planning for machining with industrial six-axis robots - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Control Engineering Practice Année : 2010

Feedrate planning for machining with industrial six-axis robots

Résumé

Nowadays, the adaptation of industrial robots to carry out high-speed machining operations is strongly required by the manufacturing industry. This new technology machining process demands the improvement of the overall performances of robots to achieve an accuracy level close to that realized by machine-tools. This paper presents a method of trajectory planning adapted for continuous machining by robot. The methodology used is based on a parametric interpolation of the geometry in the operational space. FIR filters properties are exploited to generate the tool feedrate with limited jerk. This planning method is validated experimentally on an industrial robot.
Fichier principal
Vignette du fichier
lsis-insm_jcep_BEAREE_2010.pdf (1.52 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00992192 , version 1 (16-05-2014)
hal-00992192 , version 2 (09-06-2015)

Identifiants

Citer

Adel Olabi, Richard Béarée, Olivier Gibaru, Mohamed Damak. Feedrate planning for machining with industrial six-axis robots. Control Engineering Practice, 2010, 18 (5), pp.471-482. ⟨10.1016/j.conengprac.2010.01.004⟩. ⟨hal-00992192v2⟩
359 Consultations
1344 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More