Effect of electropolymerisation conditions on the permeability of polyphenol films deposited on a vitreous carbon electrode

Noureddine Belhadj Tahar (1) , André Savall (2)

1 UM - Université de Monastir - University of Monastir
2 LGC - Laboratoire de Génie Chimique

Polymeric films were prepared from alkaline (NaOH) phenol aqueous solutions on a vitreous carbon (VC) electrode by potentiostatic or galvanostatic electro-oxidation. Permeation through such films was studied by rotating-disk electrode using the ferricyanide redox couple, and by cyclic voltammetry using phenate ions. The influence of the electropolymerisation controllable parameters such as NaOH and phenol concentrations, potential or current applied, electrosynthesis time, temperature and hydrodynamic conditions (electrode rotation + solution magnetic stirring) on the permeability of these polymeric films was examined. Conditions for the removal of phenol by electropolymerisation are discussed on the basis of the permeability of polyphenol films obtained by electrosynthesis. Permeable films were formed for a concentration of free hydroxyl anion larger of 0.1 M. An increase of the temperature to 85°C favours the formation of highly permeable films, thus avoiding electrode fouling.

Mots clés: Rotating-disk electrode; Phenol electropolymerisation; Vitreous carbon; Permeability; Wastewater treatment

Domaines: Génie chimique

Noureddine Belhadj Tahar, André Savall. Effect of electropolymerisation conditions on the permeability of polyphenol films deposited on a vitreous carbon electrode. Electrochimica Acta, 2012, vol. 82, pp. 427-433. ⟨10.1016/j.electacta.2012.06.080⟩. ⟨hal-00878691⟩