Oxygen permeation, thermal and chemical expansion of (La, Sr)(Fe, Ga)O3−δ perovskite membranes
Résumé
Dense ceramic membranes made from mixed conductors are interesting because of their potential applications formethane conversion into syngas (H2 and CO mixture). Such membranes need to present a low differential dimensional variation between the opposite faces submitted to a large gradient of oxygen partial pressure, in order to minimize mechanical stresses generated through the membrane thickness. Besides, high oxygen permeability is required for high methane reforming rate. La(1−x)SrxFe(1−y)GayO3−δ materials fulfil these two main requirements and were retained as membranes in catalytic membrane reactors (CMR). The variations of expansion and oxygen permeation of La(1−x)SrxFe(1−y)GayO3−δ perovskite materials with the partial substitution of lanthanum and iron cations, temperature and oxygen partial pressure, were studied. For low temperatures (<800 ◦C), the thermal expansion coefficient (TEC) value of La(1−x)SrxFe(1−y)GayO3−δ materials is independent of cation substitution and of oxygen partial pressure in the range tested (10−5 to 0.21 atm). For higher temperatures (>800 ◦C), TEC, then dimensional stability of the membrane, and oxygen permeation of La(1−x)SrxFe(1−y)GayO3−δ materials, are significantly affected by Sr content and oxygen partial pressure. Ga has a stabilisation effect on the TEC and has no influence on oxygen permeation flux. A good compromise between dimensional stability and oxygen permeation of materials was found to be La0.7Sr0.3Fe0.7Ga0.3O3−δ composition
Origine : Fichiers produits par l'(les) auteur(s)