Preparation and characterization of ceramics laser alloyed with WO3 and CuO nanopowders - Archive ouverte HAL Accéder directement au contenu
Communication Dans Un Congrès Année : 2007

Preparation and characterization of ceramics laser alloyed with WO3 and CuO nanopowders

Sabine Schreck
  • Fonction : Auteur
  • PersonId : 845802
S. Sachse
  • Fonction : Auteur
Magnus Rohde
  • Fonction : Auteur
  • PersonId : 845803

Résumé

A well defined surface layer of a ceramic substrate can be modified by introducing a selected second phase into a melt pool generated locally by a laser beam. CuO, WO3 powders with nano-sized particles were used to alloy alumina and a glass ceramic LTCC (Low Temperature Co-fired Ceramic). Depending on the process parameters the nano-particles were melted during the laser process and solidified during cooling in the ceramic matrix. As a result a composite with complex multiphase microstructure was developed with particle agglomerates, small crystals as well as grains covered with reaction phase, in parts with typical length scales down to the submicron range. Also the geometry of the modified area could be controlled by the process parameters. A significant change of properties could be established for the laser alloyed tracks. Especially the thermal and electrical properties were changed in comparison to that of the ceramic substrate. The developed composites showed a measurable electrical conductivity with a negative temperature coefficient for the resistivity. Therefore, the resistivity decreases with increasing temperature, which is typical for a thermally activated conduction mechanism as in semiconductors. The thermal conductivity could be increased to about 20% for CuO- and up to 70% for WO3-powder compared to the unmodified LTCC-substrate.
Fichier principal
Vignette du fichier
ens07_057-2.pdf (410.14 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00202513 , version 1 (07-01-2008)

Identifiants

  • HAL Id : hal-00202513 , version 1

Citer

Sabine Schreck, S. Sachse, Magnus Rohde. Preparation and characterization of ceramics laser alloyed with WO3 and CuO nanopowders. ENS 2007, Dec 2007, Paris, France. pp.57-62. ⟨hal-00202513⟩
78 Consultations
180 Téléchargements

Partager

Gmail Facebook X LinkedIn More