2023
Article dans une revue
- titre
- Process based modelling of power density for wire laser additive manufacturing using a coaxial head
- auteur
- Clément Roch, Christophe Tournier, Sylvain Lavernhe
- article
- Additive Manufacturing, 2023, 73 (5), pp.103648. ⟨10.1016/j.addma.2023.103648⟩
- identifiant
- hal-04139991
- DOI
- DOI : 10.1016/j.addma.2023.103648
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Influence of head orientation on bead geometry and penetration in wire laser additive manufacturing with coaxial technology
- auteur
- Clément Roch, Christophe Tournier, Sylvain Lavernhe, Adel Abbas
- article
- euspen’s 23rd International Conference & Exhibition, Jun 2023, Copenhagen, Denmark
- identifiant
- hal-04136955
- Accès au texte intégral et bibtex
-
- titre
- Influence of process parameters and head orientation on bead geometry for coaxial wire laser additive manufacturing
- auteur
- Clément Roch, Christophe Tournier, Sylvain Lavernhe
- article
- Material Forming - ESAFORM, Apr 2023, Kraków, Poland. pp.119-127, ⟨10.21741/9781644902479-14⟩
- identifiant
- hal-04136947
- DOI
- DOI : 10.21741/9781644902479-14
- Accès au texte intégral et bibtex
-
- titre
- Approche phénoménologique du contrôle de la géométrie de cordons en WAAM
- auteur
- Diego Verbist, Nicolas Béraud, Matthieu Museau, Frédéric Vignat, Sylvain Lavernhe
- article
- 18ème colloque national Smart, GIS S.mart, Apr 2023, Carry-le-Rouet, France
- identifiant
- hal-04131351
- Accès au texte intégral et bibtex
-
- titre
- Approche phénoménologique du contrôle de la géométrie de cordons en WAAM
- auteur
- Diego Verbist, Nicolas Beraud, Matthieu Museau, Frédéric Vignat, Sylvain Lavernhe
- article
- S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
- identifiant
- hal-04278694
- Accès au texte intégral et bibtex
-
- titre
- Nouvelle méthodologie in situ pour la caractérisation des erreurs géométriques d'axe de rotation sur une machine-outil multi-axes
- auteur
- Daniel Maldonado, Fabien Viprey, Sylvain Lavernhe, Gérard Poulachon
- article
- S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
- identifiant
- hal-04397913
- Accès au texte intégral et bibtex
-
- titre
- Stratégies de pilotage à grande vitesse en fusion laser sur lit de poudre dans le cadre du projet SOFIA
- auteur
- Christophe Tournier, Kamel Ettaieb, Kevin Godineau, Sylvain Lavernhe, Yann Quinsat
- article
- S-MART 2023 : 18ème Colloque national S.mart, Arts et Métiers Paristech ENSAM Aix-en-Provence, Université de Toulon [UTLN], Apr 2023, Carry-le-Rouet, France
- identifiant
- hal-04397919
- Accès au texte intégral et bibtex
-
2022
Article dans une revue
- titre
- Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints
- auteur
- Kamel Ettaieb, Kevin Godineau, Sylvain Lavernhe, Christophe Tournier
- article
- Rapid Prototyping Journal, 2022, 29 (1), pp.80-91. ⟨10.1108/RPJ-02-2022-0062⟩
- identifiant
- hal-03744945
- DOI
- DOI : 10.1108/RPJ-02-2022-0062
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Influence des paramètres de fabrication et de l'orientation de la tête de dépôt sur les cordons produits par procédé laser-fil
- auteur
- Clément Roch, Sylvain Lavernhe, Christophe Tournier
- article
- Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay [ENS Paris Saclay], Oct 2022, Gif Sur Yvette, France
- identifiant
- hal-04011650
- Accès au texte intégral et bibtex
-
- titre
- Influence du comportement de la Commande Numérique sur la trajectoire du spot laser en fusion laser sur lit de poudre
- auteur
- Kevin Godineau, Sylvain Lavernhe, Christophe Tournier
- article
- Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay [ENS Paris Saclay], Oct 2022, Gif Sur Yvette, France
- identifiant
- hal-04011651
- Accès au texte intégral et bibtex
-
- titre
- Lissage et rééchantillonnage de trajectoires curvilinéaires par splines d'Hermite
- auteur
- Cédric Leroy, Sylvain Lavernhe, Edouard Rivière Lorphèvre
- article
- Conference Manufacturing21, Ecole Normale Supérieure Paris-Saclay [ENS Paris Saclay], Oct 2022, Gif Sur Yvette, France
- identifiant
- hal-04011749
- Accès au texte intégral et bibtex
-
- titre
- Simulation thermique par méthode Flash en fabrication additive LPBF pour l'amélioration du procédé et des pièces
- auteur
- Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
- article
- 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France
- identifiant
- hal-03717711
- Accès au texte intégral et bibtex
-
2021
Article dans une revue
- titre
- Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
- auteur
- Laureen Grandguillaume, Sylvain Lavernhe, Christophe Tournier
- article
- International Journal of Advanced Manufacturing Technology, 2021, 115, pp.2765-2783. ⟨10.1007/s00170-021-07036-z⟩
- identifiant
- hal-03241834
- DOI
- DOI : 10.1007/s00170-021-07036-z
- Accès au texte intégral et bibtex
-
- titre
- A flash-based thermal simulation of scanning paths in LPBF additive manufacturing
- auteur
- Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
- article
- Rapid Prototyping Journal, 2021, 27 (4), pp.720-734. ⟨10.1108/RPJ-04-2020-0086⟩
- identifiant
- hal-03196247
- DOI
- DOI : 10.1108/RPJ-04-2020-0086
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Influence of the CNC behaviour on the laser spot trajectory in LPBF process
- auteur
- Kevin Godineau, Sylvain Lavernhe, Christophe Tournier
- article
- Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, Sep 2021, St Gallen, Switzerland
- identifiant
- hal-03372979
- Accès au texte intégral et bibtex
-
- titre
- Simulation thermique des trajectoires de lasage basée sur des flashs en fabrication additive LPBF
- auteur
- Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
- article
- Conférence Manufacturing’21, Jun 2021, Angers (en distantiel.), France
- identifiant
- hal-03268306
- Accès au texte intégral et bibtex
-
- titre
- Modélisation de la répartition d’énergie en procédé de fabrication additive laser fil avec tête coaxiale
- auteur
- Clément Roch, Sylvain Lavernhe, Christophe Tournier
- article
- Conférence Manufacturing’21, Jun 2021, Angers (en ligne), France
- identifiant
- hal-03268257
- Accès au texte intégral et bibtex
-
- titre
- Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
- auteur
- François Rouchon, Sylvain Lavernhe, Christophe Tournier, Xavier Lorang
- article
- Conférence Manufacturing’21, Jun 2021, Angers (en ligne), France
- identifiant
- hal-03268258
- Accès au texte intégral et bibtex
-
2020
Article dans une revue
- titre
- Simulation of finishing operations based on an implicit representation of surfaces
- auteur
- Charly Euzenat, Sylvain Lavernhe, Christophe Tournier
- article
- CIRP Journal of Manufacturing Science and Technology, 2020, 31, pp.78-90. ⟨10.1016/j.cirpj.2020.09.005⟩
- identifiant
- hal-02998329
- DOI
- DOI : 10.1016/j.cirpj.2020.09.005
- Accès au texte intégral et bibtex
-
2019
Article dans une revue
- titre
- Modelling and characterisation of geometric errors on 5-axis machine-tool
- auteur
- F Viprey, Hichem Nouira, S Lavernhe, Christophe Tournier
- article
- Mechanics & Industry, 2019, 20 (6), pp.605-613. ⟨10.1051/meca/2019034⟩
- identifiant
- hal-02142427
- DOI
- DOI : 10.1051/meca/2019034
- Accès au texte intégral et bibtex
-
- titre
- Implicit modeling of abrasion process based on potential field
- auteur
- Charly Euzenat, Sylvain Lavernhe, Christophe Tournier
- article
- Computer-Aided Design, 2019, 110, pp.69-77. ⟨10.1016/j.cad.2018.12.011⟩
- identifiant
- hal-02013498
- DOI
- DOI : 10.1016/j.cad.2018.12.011
- Accès au texte intégral et bibtex
-
- titre
- Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
- auteur
- Kevin Godineau, Sylvain Lavernhe, Christophe Tournier
- article
- Additive Manufacturing, 2019, 26, pp.250-257. ⟨10.1016/j.addma.2019.02.003⟩
- identifiant
- hal-02011888
- DOI
- DOI : 10.1016/j.addma.2019.02.003
- Accès au texte intégral et bibtex
-
- titre
- Modelling and characterisation of geometric errors on 5-axis machine-tool
- auteur
- Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
- article
- Mechanics & Industry, 2019, 20 (6), pp.605. ⟨10.1051/meca/2019034⟩
- identifiant
- hal-02960320
- DOI
- DOI : 10.1051/meca/2019034
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Influence of the opto-mechanical chain on the energy provided by the laser spot to the material in laser powder bed fusion processes
- auteur
- Kevin Godineau, Sylvain Lavernhe, Christophe Tournier
- article
- EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Sep 2019, Nantes, France
- identifiant
- hal-02308576
- Accès au texte intégral et bibtex
-
- titre
- Opto-mechanical modeling and identification for calibration of LPBF machine
- auteur
- Sylvain Lavernhe, Kevin Godineau, Christophe Tournier
- article
- EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Sep 2019, Nantes, France
- identifiant
- hal-02308587
- Accès au bibtex
-
- titre
- FVPM simulation of scratching induced by a spherical indenter
- auteur
- Charly Euzenat, Sylvain Lavernhe, Christophe Tournier
- article
- CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Jun 2019, Sheffield, United Kingdom. ⟨10.1016/j.procir.2019.04.149⟩
- identifiant
- hal-02292426
- DOI
- DOI : 10.1016/j.procir.2019.04.149
- Accès au texte intégral et bibtex
-
- titre
- A kinematic simulation software for additive manufacturing metal deposition processes
- auteur
- Tan-Quang Duong, Nicolas Ferrier, S Lavernhe, Christophe Tournier
- article
- ICWAM'19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Jun 2019, Metz, France
- identifiant
- hal-02151268
- Accès au texte intégral et bibtex
-
- titre
- Performance simulation of different toolpaths in 2D1/2 pocket milling
- auteur
- Cédric Leroy, Edouard Rivière-Lorphèvre, Francois Ducobu, Sylvain Lavernhe, Christophe Tournier, Enrico Filippi
- article
- PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019, May 2019, Vitoria-Gasteiz, Spain. pp.080001, ⟨10.1063/1.5112609⟩
- identifiant
- hal-02571164
- DOI
- DOI : 10.1063/1.5112609
- Accès au texte intégral et bibtex
-
- titre
- Caractérisation Multi-Niveaux de l'Entité d'Usinage de Forme Complexe
- auteur
- Soumiya Bendjebla, Sylvain Lavernhe, Charyar Mehdi-Souzani, Nabil Anwer
- article
- 16eme Colloque National S-mart/AIP-PRIMECA, Apr 2019, Les Karellis – Vallée de la maurienne, France
- identifiant
- hal-02092441
- Accès au bibtex
-
- titre
- Thermal simulation of scanning paths in LBM additive manufacturing
- auteur
- Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
- article
- Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, 2019, Pavia, Italy
- identifiant
- hal-02422198
- Accès au texte intégral et bibtex
-
Brevet
- titre
- Trajectoire adaptative pour fabrication additive utilisant une source laser
- auteur
- Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier, Gilles Walrand
- article
- France, N° de brevet: WO2021058913. 2019, https://patentscope.wipo.int/search/fr/detail.jsf?docId=WO2021058913
- identifiant
- hal-04017069
- Accès au bibtex
-
- titre
- Fabrication additive par modulation de puissance laser
- auteur
- Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier, Gilles Walrand
- article
- France, N° de brevet: WO2020157427. 2019, https://patentscope.wipo.int/search/fr/detail.jsf?docId=WO2020157427
- identifiant
- hal-04017066
- Accès au bibtex
-
- titre
- Fabrication additive par modulation de vitesse de balayage
- auteur
- Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier, Gilles Walrand
- article
- France, N° de brevet: WO2020157426. 2019, https://patentscope.wipo.int/search/fr/detail.jsf?docId=WO2020157426
- identifiant
- hal-04017062
- Accès au bibtex
-
2018
Article dans une revue
- titre
- Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
- auteur
- Tan-Quang Duong, Pedro Rodriguez-Ayerbe, Sylvain Lavernhe, Christophe Tournier, Didier Dumur
- article
- International Journal of Advanced Manufacturing Technology, 2018, 100, pp.3113-3125. ⟨10.1007/s00170-018-2859-z⟩
- identifiant
- hal-01908400
- DOI
- DOI : 10.1007/s00170-018-2859-z
- Accès au texte intégral et bibtex
-
- titre
- Scanner path planning with the control of overlap for part inspection with an industrial robot
- auteur
- Nguyen Duy Minh Phan, Yann Quinsat, Sylvain Lavernhe, Claire Lartigue
- article
- International Journal of Advanced Manufacturing Technology, 2018, 98, pp.629-643. ⟨10.1007/s00170-018-2336-8⟩
- identifiant
- hal-01815462
- DOI
- DOI : 10.1007/s00170-018-2336-8
- Accès au texte intégral et bibtex
-
- titre
- Effective NC machining simulation with OptiX ray tracing engine
- auteur
- Marc Jachym, Sylvain Lavernhe, Charly Euzenat, Christophe Tournier
- article
- The Visual Computer, 2018, 35, pp.281-288. ⟨10.1007/s00371-018-1497-7⟩
- identifiant
- hal-01742413
- DOI
- DOI : 10.1007/s00371-018-1497-7
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Multi-level Freeform Machining Feature Characterization
- auteur
- Soumiya Bendjebla, Na Cai, Sylvain Lavernhe, Charyar Mehdi-Souzani, Nabil Anwer
- article
- CAD'18. Computer-Aided Design and Applications Conference, Jul 2018, Paris, France
- identifiant
- hal-01780415
- Accès au bibtex
-
- titre
- Modélisation d'une chaine opto-mécanique de fabrication additive avec prise en compte des défauts d'assemblage
- auteur
- Kevin Godineau, Sylvain Lavernhe, Christophe Tournier
- article
- Machines et Usinage à Grande Vitesse, Jun 2018, Bordeaux, France
- identifiant
- hal-02292487
- Accès au texte intégral et bibtex
-
- titre
- Simulation FVPM de rayage mono-grain
- auteur
- Charly Euzenat, Sylvain Lavernhe, Christophe Tournier
- article
- Machines et Usinage à Grande Vitesse, Jun 2018, Bordeaux, France
- identifiant
- hal-02292985
- Accès au texte intégral et bibtex
-
- titre
- Freeform Machining Feature Recognition with Manufacturability Analysis
- auteur
- Na Cai, Soumiya Bendjebla, Sylvain Lavernhe, Charyar Mehdi-Souzani, Nabil Anwer
- article
- CIRP CMS'18. 51st CIRP Conference on Manufacturing Systems, May 2018, Stockholm Sweden. ⟨10.1016/j.procir.2018.03.261⟩
- identifiant
- hal-01780392
- DOI
- DOI : 10.1016/j.procir.2018.03.261
- Accès au bibtex
-
- titre
- FVPM simulation of a single-particle scratching surface
- auteur
- Charly Euzenat, Sylvain Lavernhe, Christophe Tournier
- article
- 14th internation conference on High Speed Machining 2018 - HSM 2018, Apr 2018, San-Sebastian, Spain
- identifiant
- hal-01773105
- Accès au texte intégral et bibtex
-
- titre
- Part surface roughness on laser sintering and milling of maraging steel 300
- auteur
- Claire Morel, Vitor Valentin Cioca, Sylvain Lavernhe, A L Jardini, Erik Gustavo del Conte
- article
- 14th Internation Conference on High Speed Manufacturing, Apr 2018, San-Sebastian, Spain
- identifiant
- hal-01773243
- Accès au texte intégral et bibtex
-
- titre
- Modélisation implicite du procédé d'abrasion
- auteur
- Charly Euzenat, Sylvain Lavernhe, Christophe Tournier
- article
- Journées du Groupe de Travail en Modélisation Géométrique, 2018, Aix-en-Provence, France
- identifiant
- hal-02292469
- Accès au texte intégral et bibtex
-
HDR
- titre
- Contributions au développement du processus de fabrication : amélioration des performances en usinage multiaxes
- auteur
- Sylvain Lavernhe
- article
- Génie mécanique [physics.class-ph]. ENS Paris-Saclay, France, 2018
- identifiant
- tel-01973201
- Accès au texte intégral et bibtex
-
2017
Article dans une revue
- titre
- Dynamic approach of the feedrate interpolation for trajectory planning process in multi-axis machining
- auteur
- Margot Vulliez, Sylvain Lavernhe, Olivier Bruneau
- article
- International Journal of Advanced Manufacturing Technology, 2017, 88 (5), pp.2085-2096. ⟨10.1007/s00170-016-8903-y⟩
- identifiant
- hal-01330726
- DOI
- DOI : 10.1007/s00170-016-8903-y
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Opto-mechanical modelling of an additive manufacturing laser scanning head including assembly defects
- auteur
- Kevin Godineau, Sylvain Lavernhe, Christophe Tournier
- article
- Joint Special Interest Group meeting between EUSPEN and ASPE : Dimensional Accuracy and Surface Finish in Additive Manufacturing, Oct 2017, Leuven, Belgium
- identifiant
- hal-02309742
- Accès au texte intégral et bibtex
-
- titre
- Modélisation et caractérisation des défauts de structure de machine-outil 5-axes pour la mesure in-process
- auteur
- F Viprey, H. Nouira, S Lavernhe, Christophe Tournier
- article
- 23ème Congrès Français de Mécanique, Aug 2017, Lille, France
- identifiant
- hal-01705258
- Accès au texte intégral et bibtex
-
- titre
- Freeform Machining Features: New Concepts and Classification
- auteur
- Soumiya Bendjebla, Na Cai, Nabil Anwer, Sylvain Lavernhe, Charyar Mehdi-Souzani
- article
- CIRP ICME'17. 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Jul 2017, Gulf of Naples, Italy. ⟨10.1016/j.procir.2017.12.248⟩
- identifiant
- hal-01620490
- DOI
- DOI : 10.1016/j.procir.2017.12.248
- Accès au texte intégral et bibtex
-
- titre
- Choix de l'orientation outil en usinage 5 axes positionnés à partir de polytopes de jerk
- auteur
- Laureen Grandguillaume, Sylvain Lavernhe, Christophe Tournier
- article
- 15ème colloque national AIP-Priméca, Apr 2017, La Plagne, France
- identifiant
- hal-04482598
- Accès au texte intégral et bibtex
-
- titre
- Inter-comparison on multi-feature bar calibration for determining machine-tool geometric errors
- auteur
- F Viprey, H. Nouira, S Lavernhe, Christophe Tournier
- article
- Lamdamap 12th International Conference & Exhibition, Mar 2017, Renishaw Innovation Centre (UK), United Kingdom
- identifiant
- hal-02292388
- Accès au texte intégral et bibtex
-
- titre
- Path planning of a laser-scanner with the control of overlap for 3d part inspection
- auteur
- Nguyen Duy Minh Phan, Yann Quinsat, Sylvain Lavernhe, Claire Lartigue
- article
- 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’17 , 2017, Naples, France
- identifiant
- hal-01654044
- Accès au texte intégral et bibtex
-
2016
Article dans une revue
- titre
- Novel multi-feature bar design for machine tools geometric errors identification
- auteur
- Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
- article
- Precision Engineering, 2016, 46, pp.323-338. ⟨10.1016/j.precisioneng.2016.06.002⟩
- identifiant
- hal-01357513
- DOI
- DOI : 10.1016/j.precisioneng.2016.06.002
- Accès au texte intégral et bibtex
-
- titre
- A tool path patching strategy around singular point in 5-axis ball-end milling
- auteur
- Laureen Grandguillaume, Sylvain Lavernhe, Christophe Tournier
- article
- International Journal of Production Research, 2016, 54 (24), pp.7480-7490. ⟨10.1080/00207543.2016.1196835⟩
- identifiant
- hal-01365996
- DOI
- DOI : 10.1080/00207543.2016.1196835
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Offline Gain Adjustment with Constraints for Contour Error Reduction in High Speed Milling
- auteur
- Tan-Quang Duong, Pedro Rodriguez-Ayerbe, Sylvain Lavernhe, Christophe Tournier, Didier Dumur
- article
- IEEE International Conference on Advanced Intelligent Mechatronics (AIM 2016), Jul 2016, Banff, Canada. ⟨10.1109/aim.2016.7576767⟩
- identifiant
- hal-01365977
- DOI
- DOI : 10.1109/aim.2016.7576767
- Accès au texte intégral et bibtex
-
- titre
- Utilisation des polytopes de manipulabilité cinématique pour la génération de trajectoires 5 axes en UGV
- auteur
- Laureen Grandguillaume, Sylvain Lavernhe, Christophe Tournier
- article
- 9èmes assises Machines et Usinage à Grande Vitesse, Jun 2016, Tours, France
- identifiant
- hal-04482589
- Accès au texte intégral et bibtex
-
- titre
- Reduction of a five axis machine tool kinematic model by combinational analysis to improve volumetric accuracy
- auteur
- Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
- article
- TIM Final Workshop, PTB, Braunschweig, Germany, May 2016, Braunschweig, Germany
- identifiant
- hal-01359427
- Accès au bibtex
-
- titre
- Determination of volumetric machine tool errors by using a hole-bar material standard
- auteur
- Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
- article
- TIM Final Workshop, PTB, Braunschweig, Germany, May 2016, Braunschweig, Germany
- identifiant
- hal-01359425
- Accès au bibtex
-
- titre
- Novel Hole-Bar Standard Design and Inter-Comparison for Geometric Errors Identification on Machine-Tool
- auteur
- Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
- article
- International Journal of Industrial and Manufacturing Engineering, World Academy of Science, Engineering and Technology, Jan 2016, Dubai, United Arab Emirates
- identifiant
- hal-01313669
- Accès au texte intégral et bibtex
-
- titre
- Receding Horizon Based Offline Gain Adjustment for Contour Error Reduction in High Speed Milling
- auteur
- Tan-Quang Duong, Pedro Rodriguez-Ayerbe, Sylvain Lavernhe, Christophe Tournier, Didier Dumur
- article
- CIRP ICME '16 - 10th CIRP Conference on Intelligent Computation In Manufacturing Engineering, 2016, Ischia, Italy. pp.227-232, ⟨10.1016/j.procir.2016.06.040⟩
- identifiant
- hal-02120164
- DOI
- DOI : 10.1016/j.procir.2016.06.040
- Accès au texte intégral et bibtex
-
2015
Article dans une revue
- titre
- Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
- auteur
- Felix Abecassis, Sylvain Lavernhe, Christophe Tournier, Pierre-Alain Boucard
- article
- Computers in Industry, 2015, 71, pp.1-9. ⟨10.1016/j.compind.2015.02.007⟩
- identifiant
- hal-01136770
- DOI
- DOI : 10.1016/j.compind.2015.02.007
- Accès au texte intégral et bibtex
-
- titre
- A physically-based model for global collision avoidance in 5-axis point milling
- auteur
- Virgile Lacharnay, Sylvain Lavernhe, Christophe Tournier, Claire Lartigue
- article
- Computer-Aided Design, 2015, 64, pp.1-8. ⟨10.1016/j.cad.2015.02.003⟩
- identifiant
- hal-01121686
- DOI
- DOI : 10.1016/j.cad.2015.02.003
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Kinematical smoothing of rotary axis near singularity point
- auteur
- Laureen Grandguillaume, Sylvain Lavernhe, Christophe Tournier
- article
- 12th International conference on High Speed Machining, Oct 2015, Nanjing, China. pp.501-508
- identifiant
- hal-01223135
- Accès au texte intégral et bibtex
-
- titre
- Mold Manufacturing Optimization: A Global Approach of Milling and Polishing Processes
- auteur
- Laureen Grandguillaume, Sylvain Lavernhe, Yann Quinsat, Christophe Tournier
- article
- 15th CIRP Conference On Modelling Of Machining Operations, Jun 2015, Karlsruhe, Germany. pp.13-18, ⟨10.1016/j.procir.2015.03.035⟩
- identifiant
- hal-01161695
- DOI
- DOI : 10.1016/j.procir.2015.03.035
- Accès au texte intégral et bibtex
-
- titre
- Modélisation géométrique des machines-outils 5 axes pour la compensation de l'exactitude volumétrique
- auteur
- Fabien Viprey, Sylvain Lavernhe, Christophe Tournier, Hichem Nouira
- article
- 14eme coloque national AIP Primeca, Mar 2015, La Plagne, France
- identifiant
- hal-01122509
- Accès au texte intégral et bibtex
-
- titre
- Optimisation de la fabrication de moule : Une approche globale des procédés de fraisage et de polissage
- auteur
- Laureen Grandguillaume, Yann Quinsat, Sylvain Lavernhe, Christophe Tournier
- article
- 14eme coloque national AIP Primeca, Mar 2015, La Plagne, France
- identifiant
- hal-01122502
- Accès au texte intégral et bibtex
-
- titre
- Reduction of a RRTTT machine tool geometric model by combinatorial analysis to improve volumetric accuracy
- auteur
- F Viprey, S Lavernhe, H Nouira, Christophe Tournier
- article
- Laser Metrology and Machine Performance (LAMDAMAP) 2015, Mar 2015, Huddersfield, United Kingdom
- identifiant
- hal-01122531
- Accès au texte intégral et bibtex
-
2014
Article dans une revue
- titre
- Direct Trajectory Interpolation on the Surface using an Open CNC
- auteur
- Xavier Beudaert, Sylvain Lavernhe, Christophe Tournier
- article
- International Journal of Advanced Manufacturing Technology, 2014, 75, pp.535-546. ⟨10.1007/s00170-014-6134-7⟩
- identifiant
- hal-01055090
- DOI
- DOI : 10.1007/s00170-014-6134-7
- Accès au texte intégral et bibtex
-
- titre
- Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
- auteur
- Sylvain Lavernhe, Yann Quinsat, Claire Lartigue, Christopher Brown
- article
- International Journal of Advanced Manufacturing Technology, 2014, 74, pp. 393-401. ⟨10.1007/s00170-014-5689-7⟩
- identifiant
- hal-01002334
- DOI
- DOI : 10.1007/s00170-014-5689-7
- Accès au texte intégral et bibtex
-
- titre
- CAD-Based Calibration and Shape Measurement with StereoDIC Principle and Application on Test and Industrial Parts
- auteur
- Benoît Beaubier, John-Eric Dufour, François Hild, Stéphane Roux, Sylvain Lavernhe, Karine Lavernhe Taillard
- article
- Experimental Mechanics, 2014, 54 (3), pp.329-341. ⟨10.1007/s11340-013-9794-6⟩
- identifiant
- hal-00974363
- DOI
- DOI : 10.1007/s11340-013-9794-6
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Identification of the geometric errors of a Mikron 5-axis machine-tool using the hole-bar 3D standard and the laser tracer interferometer system
- auteur
- Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
- article
- Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, NPL, Nov 2014, Teddington, United Kingdom
- identifiant
- hal-01081466
- Accès au bibtex
-
- titre
- Geometric errors identification on 5-axis machine-tool using both novel hole-bar standard design and laser tracer interferometer system
- auteur
- Fabien Viprey, Sylvain Lavernhe, Christophe Tournier, Hichem Nouira
- article
- MacroScale : Recent Developments In Traceable Dimensional Measurements, Oct 2014, Wien, Austria
- identifiant
- hal-01079558
- Accès au bibtex
-
- titre
- Amélioration de la qualité des pièces usinées par interpolation directe du trajet sur surface
- auteur
- Sylvain Lavernhe, Xavier Beudaert, Christophe Tournier
- article
- Machines et Usinage à Grande Vitesse 2014, Oct 2014, Clermont-Ferrand, France
- identifiant
- hal-01096699
- Accès au texte intégral et bibtex
-
- titre
- Influence de la voxelisation sur la génération de trajectoires 5 axes sans collision par champs répulsifs
- auteur
- Virgile Lacharnay, Sylvain Lavernhe, Christophe Tournier
- article
- Machines et Usinage à Grande Vitesse 2014, Oct 2014, Clermont-Ferrand, France
- identifiant
- hal-01096698
- Accès au texte intégral et bibtex
-
- titre
- Feedrate optimization in 5-axis machining based on direct trajectory interpolation on the surface using an open cnc
- auteur
- Xavier Beudaert, Sylvain Lavernhe, Christophe Tournier
- article
- 11th International Conference on High Speed Machining, Sep 2014, Prague, Czech Republic. paper n. 14042, 6 p
- identifiant
- hal-01064136
- Accès au texte intégral et bibtex
-
- titre
- Parameters set-up for collision avoidance and smooth motion in 5-axis end milling based on a potential field approach
- auteur
- Virgile Lacharnay, Christophe Tournier, Sylvain Lavernhe
- article
- 11th International Conference on High Speed Machining, Sep 2014, Prague, Czech Republic. paper n. 14041, 6 p
- identifiant
- hal-01064128
- Accès au texte intégral et bibtex
-
- titre
- Conversion of G-code programs for milling into STEP-NC
- auteur
- Shixin Xú, Nabil Anwer, Sylvain Lavernhe
- article
- Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Jun 2014, Toulouse, France
- identifiant
- hal-01096093
- Accès au texte intégral et bibtex
-
- titre
- Axis control using model predictive control: identification and friction effect reduction
- auteur
- Pedro Rodriguez-Ayerbe, Didier Dumur, Sylvain Lavernhe
- article
- 3rd International Conference on Virtual Machining Process Technology, May 2014, Calgary, Canada. 8p
- identifiant
- hal-01023265
- Accès au texte intégral et bibtex
-
2013
Article dans une revue
- titre
- 5-axis local corner rounding of linear tool path discontinuities
- auteur
- Xavier Beudaert, Sylvain Lavernhe, Christophe Tournier
- article
- International Journal of Machine Tools & Manufacture, 2013, 73, pp.9 - 16. ⟨10.1016/j.ijmachtools.2013.05.008⟩
- identifiant
- hal-00843635
- DOI
- DOI : 10.1016/j.ijmachtools.2013.05.008
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Tool path definitions and their interpolation for optimized 5-axis High-Speed Machining
- auteur
- Sylvain Lavernhe
- article
- International Workshop on Mathematics and Algorithms forComputer-Aided Manufacturing, Engineering and Numerical Control, Oct 2013, Beijing, China
- identifiant
- hal-01023269
- Accès au bibtex
-
- titre
- Performance Evaluation of CUDA programming for machining simulation
- auteur
- Felix Abecassis, Sylvain Lavernhe, Christophe Tournier, Pierre-Alain Boucard
- article
- International Conference on Graphics Engineering, Jun 2013, Madrid, Spain
- identifiant
- hal-00869774
- Accès au texte intégral et bibtex
-
2012
Article dans une revue
- titre
- Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
- auteur
- Xavier Beudaert, Sylvain Lavernhe, Christophe Tournier
- article
- International Journal of Machine Tools & Manufacture, 2012, 57, pp.73-82. ⟨10.1016/j.ijmachtools.2012.02.005⟩
- identifiant
- hal-00679118
- DOI
- DOI : 10.1016/j.ijmachtools.2012.02.005
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Correction of trajectory execution errors in hsm using a miror approach
- auteur
- David Prévost, Sylvain Lavernhe, Claire Lartigue
- article
- Eight International Conference on High Speed Machining (HSM), Dec 2012, Metz, France. 6 p
- identifiant
- hal-00999577
- Accès au texte intégral et bibtex
-
- titre
- Modélisation thermomécanique hybride en perçage pour la simulation du champ de temperature dans l'outil
- auteur
- Nicolas Guillemot, Sylvain Lavernhe, Claire Lartigue, Dominique Deloison, Guillaume Abrivard, Dominique Schuster, Daniel Aliaga
- article
- 7èmes assises Machines et Usinage à Grande Vitesse MUGV 2012 - Intercut 2012, Oct 2012, Saint-Etienne, France. 10p
- identifiant
- hal-00999323
- Accès au texte intégral et bibtex
-
- titre
- Kinematical analysis of 5-axis corner smoothing for transitions between linear (G1) blocks
- auteur
- Xavier Beudaert, Sylvain Lavernhe, Christophe Tournier
- article
- Machines et Usinages à Grande Vitesse 2012, Oct 2012, Saint Etienne, France
- identifiant
- hal-00986166
- Accès au texte intégral et bibtex
-
- titre
- CAD-based Calibration of a 3D DIC System
- auteur
- Benoît Beaubier, Karine Lavernhe Taillard, Gilles Besnard, Sylvain Lavernhe, François Hild, Stéphane Roux
- article
- SEM XII International Congress & Exposition on Experimental and Applied Mechanics, Jun 2012, United States
- identifiant
- hal-00727879
- Accès au texte intégral et bibtex
-
- titre
- Maximum Feedrate Interpolator for Multi-axis CNC Machining with Jerk Constraints
- auteur
- Xavier Beudaert, Sylvain Lavernhe, Christophe Tournier
- article
- 9th International Conference on High Speed Machining, Mar 2012, San Sebastian, Spain
- identifiant
- hal-00986174
- Accès au texte intégral et bibtex
-
2011
Article dans une revue
- titre
- Adaptive Monte Carlo applied to uncertainty estimation in a five axis machine tool link errors identification
- auteur
- Loïc Andolfatto, René Mayer, Sylvain Lavernhe
- article
- International Journal of Machine Tools and Manufacture, 2011, 51 (7-8), pp.618-627. ⟨10.1016/j.ijmachtools.2011.03.006⟩
- identifiant
- hal-00599641
- DOI
- DOI : 10.1016/j.ijmachtools.2011.03.006
- Accès au texte intégral et bibtex
-
- titre
- Characterization of 3D surface topography in 5-axis milling
- auteur
- Yann Quinsat, Sylvain Lavernhe, Claire Lartigue
- article
- Wear, 2011, 271 (3-4), pp.590-595. ⟨10.1016/j.wear.2010.05.014⟩
- identifiant
- hal-00599655
- DOI
- DOI : 10.1016/j.wear.2010.05.014
- Accès au texte intégral et bibtex
-
- titre
- Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool
- auteur
- Loïc Andolfatto, Sylvain Lavernhe, René Mayer
- article
- International Journal of Machine Tools and Manufacture, 2011, 51 (10-11), pp.787-796. ⟨10.1016/j.ijmachtools.2011.07.002⟩
- identifiant
- hal-00609038
- DOI
- DOI : 10.1016/j.ijmachtools.2011.07.002
- Accès au texte intégral et bibtex
-
- titre
- Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining
- auteur
- David Prévost, Sylvain Lavernhe, Claire Lartigue, Didier Dumur
- article
- International Journal of Mechatronics and Manufacturing Systems, 2011, 4 (3-4), pp.266-284. ⟨10.1504/IJMMS.2011.041472⟩
- identifiant
- hal-00608861
- DOI
- DOI : 10.1504/IJMMS.2011.041472
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Modélisation et évaluation du comportement dynamique d'une structure de machine outil UGV pour la prédiction des défauts géométriques
- auteur
- David Prévost, Sylvain Lavernhe, François Louf, Philippe Rouch
- article
- 20ème Congrès Français de Mécanique, Aug 2011, Besançon, France. CDROM paper n°714
- identifiant
- hal-00637859
- Accès au texte intégral et bibtex
-
- titre
- Experimental evaluation of errors during five axis High-Speed Machine tool motion
- auteur
- Loïc Andolfatto, René Mayer, Sylvain Lavernhe
- article
- 23rd Canadian Congress of Applied Mechanics, Jun 2011, Vancouver, Canada. 4 p
- identifiant
- hal-00999568
- Accès au texte intégral et bibtex
-
2010
Article dans une revue
- titre
- Model for the prediction of 3D surface topography in 5-axis milling
- auteur
- Sylvain Lavernhe, Yann Quinsat, Claire Lartigue
- article
- International Journal of Advanced Manufacturing Technology, 2010, 51, pp.915-924. ⟨10.1007/s00170-010-2686-3⟩
- identifiant
- hal-00538108
- DOI
- DOI : 10.1007/s00170-010-2686-3
- Accès au texte intégral et bibtex
-
2009
Article dans une revue
- titre
- Feed drive simulation for the prediction of the tool path follow up in High Speed Machinning
- auteur
- David Prévost, Sylvain Lavernhe, Claire Lartigue
- article
- Journal of Machine Engineering, High Performance Manufacturing - Machines, 2009, 8 (4), pp 32-42
- identifiant
- hal-00476599
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Characterization of 3D surface topography in 5 axis milling
- auteur
- Yann Quinsat, Sylvain Lavernhe, Claire Lartigue
- article
- 12 th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow 8-10 juillet 2009, Jul 2009, Rzeszow, Poland. 5p
- identifiant
- hal-00999713
- Accès au texte intégral et bibtex
-
- titre
- Modélisation d'axe de machine outil pour la simulation du suivi de trajectoires en UGV
- auteur
- David Prévost, Sylvain Lavernhe, Claire Lartigue
- article
- 11ème colloque National AIP PRIMECA La Plagne, Apr 2009, La Plagne, France. 13p
- identifiant
- hal-00999712
- Accès au texte intégral et bibtex
-
- titre
- Feed drive simulation for the prediction of the tool path follow up in High Speed Machinning
- auteur
- David Prévost, Sylvain Lavernhe, Claire Lartigue
- article
- 20th CIRP International Conference on Supervising and Diagnostics of Machining Systems, High Performance Manufacturing, Mar 2009, Karpacz, Poland. 12p
- identifiant
- hal-00999710
- Accès au texte intégral et bibtex
-
2008
Article dans une revue
- titre
- Optimization of 5-axis high-speed machining using a surface based approach
- auteur
- Sylvain Lavernhe, Christophe Tournier, Claire Lartigue
- article
- Computer-Aided Design, 2008, 40 (10-11), pp.1015-1023. ⟨10.1016/j.cad.2008.08.006⟩
- identifiant
- hal-00373701
- DOI
- DOI : 10.1016/j.cad.2008.08.006
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- NC-simulation for the prediction of surface finish in 5-axis High-Speed Machining
- auteur
- Sylvain Lavernhe, Yann Quinsat, Christophe Tournier, Claire Lartigue, René Mayer
- article
- 3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland),, Jun 2008, Dublin, Ireland. pp.387 - 396
- identifiant
- hal-00999715
- Accès au texte intégral et bibtex
-
2007
Article dans une revue
- titre
- Kinematical performance prediction in multi-axis machining for process planning optimization
- auteur
- Sylvain Lavernhe, Christophe Tournier, Claire Lartigue
- article
- International Journal of Advanced Manufacturing Technology, 2007, 37 (5-6), p. 534-544. ⟨10.1007/s00170-007-1001-4⟩
- identifiant
- hal-00373706
- DOI
- DOI : 10.1007/s00170-007-1001-4
- Accès au texte intégral et bibtex
-
- titre
- Intégration de contraintes cinématiques pour le calcul de l'orientation optimisée de l'axe de l'outil en usinage 5 axes
- auteur
- Sylvain Lavernhe, Christophe Tournier, Claire Lartigue
- article
- Mechanics & Industry, 2007, 8 (5), pp.419-427. ⟨10.1051/meca:2007064⟩
- identifiant
- hal-00476702
- DOI
- DOI : 10.1051/meca:2007064
- Accès au texte intégral et bibtex
-
2006
Article dans une revue
- titre
- 5-axis High Speed Milling Optimisation
- auteur
- Christophe Tournier, Sylvain Lavernhe, Claire Lartigue
- article
- Revue Internationale d'Ingenierie Numerique, 2006, 2 (1-2), p. 173-184
- identifiant
- hal-00373724
- Accès au texte intégral et bibtex
-
Communication dans un congrès
- titre
- Model for performance prediction in multi-axis machining
- auteur
- Sylvain Lavernhe, Christophe Tournier, Claire Lartigue
- article
- CIRP 2nd International Conference High Performance Cutting, Jun 2006, Vancouver, Canada. 9p
- identifiant
- hal-00999720
- Accès au texte intégral et bibtex
-
- titre
- Integration de contraintes cinématiques pour le calcul de l'orientation optimisée de l'axe de l'outil en usinage à 5 axes
- auteur
- Sylvain Lavernhe, Christophe Tournier, Claire Lartigue
- article
- 4èmes assises MUGV, Jun 2006, Aix en Provence, France. 11p
- identifiant
- hal-00999716
- Accès au texte intégral et bibtex
-
- titre
- Kinematical performances in 5-axis machining
- auteur
- Sylvain Lavernhe, Christophe Tournier, Claire Lartigue
- article
- IDMME, May 2006, Grenoble, France. 12p
- identifiant
- hal-00999718
- Accès au texte intégral et bibtex
-
- titre
- Identification de la géométrie de machines CN par mesure d'artefacts
- auteur
- M Makki, S Lavernhe, F Thiébaut, Christophe Tournier, C Lartigue
- article
- 1er Congrès International Francophone de Mécanique Avancée, Faculté de Génie Mécanique, Université d’Alep, Syrie, May 2006, Alep, Syrie
- identifiant
- hal-01101528
- Accès au texte intégral et bibtex
-
- titre
- Tool path generation and post-processor issues in five-axis high speed machining of hydro turbine blades
- auteur
- Christophe Tournier, Cedric Castagnetti, Sylvain Lavernhe, François Avellan
- article
- Fifth International Conference on High Speed Machining, Mar 2006, Metz, France
- identifiant
- hal-00577235
- Accès au texte intégral et bibtex
-
Thèse
- titre
- Prise en compte des contraintes associées au couple MO-CN en génération de trajectoires 5 axes UGV
- auteur
- Sylvain Lavernhe
- article
- Sciences de l'ingénieur [physics]. École normale supérieure de Cachan - ENS Cachan, 2006. Français. ⟨NNT : ⟩
- identifiant
- tel-00362983
- Accès au texte intégral et bibtex
-
2005
Communication dans un congrès
- titre
- Optimisation en fraisage 5 axes grande vitesse
- auteur
- Christophe Tournier, Sylvain Lavernhe, Claire Lartigue
- article
- 4th International conference on Integrated Design and Production, Nov 2005, Casablanca, Maroc
- identifiant
- hal-01224463
- Accès au texte intégral et bibtex
-
2004
Communication dans un congrès
- titre
- Performance of off-line polynomial CNC trajectories within the context of HSM
- auteur
- Sylvain Lavernhe, Xinbin Duan, Christophe Tournier, Claire Lartigue
- article
- 2004 International Mechanical Engineering Congress and Exposition, Nov 2004, Anaheim, United States
- identifiant
- hal-00577232
- Accès au texte intégral et bibtex
-
- titre
- Description formats of tool trajectory suited to High-Speed Machining
- auteur
- Armelle Affouard, Christophe Tournier, Sylvain Lavernhe, Claire Lartigue
- article
- International Conference on High Speed Machining, Mar 2004, Nanjing, China
- identifiant
- hal-00577227
- Accès au texte intégral et bibtex
-
2003
Article dans une revue
- titre
- Usinage de poches en UGV - Aide au choix de stratégies
- auteur
- Kwamiwi Mawussi, Sylvain Lavernhe, Claire Lartigue
- article
- Revue Internationale de CFAO et d'informatique graphique, 2003, 18 (3), pp.337-349
- identifiant
- hal-00373733
- Accès au texte intégral et bibtex
-